What is the primary use for the Gear4Music Braided Pro Cable?

It is primarily used as an instrument cable to connect guitars, basses, or keyboards to amplifiers and interfaces. The 6m length makes it suitable for both studio recording and live stage performances.

What does TS stand for in the connector description?

TS stands for 'Tip-Sleeve', which refers to a mono 6.35mm (1/4 inch) jack. This is the standard connector type for most unbalanced instrument signals.

How does the braided design benefit the user?

The braided exterior offers increased physical durability compared to standard rubber or PVC cables. It also helps to prevent tangling and adds an extra layer of protection against external noise and interference.

Is this cable suitable for connecting speakers to an amplifier?

No, this is an instrument cable designed for low-power signals. You should use dedicated speaker cables for connecting amplifiers to passive speakers to avoid damage to your equipment.

Why is low capacitance important for a 6m cable?

Longer cables can act like a capacitor, which rolls off high-end frequencies. The low-capacitance design of this cable helps maintain a full frequency response and preserves the clarity of the instrument's signal.

Can I use this cable with an acoustic guitar?

Yes, provided the acoustic guitar has a standard 6.35mm (1/4 inch) jack output from a preamp or pickup system. It will transmit the signal to an acoustic amplifier or PA system effectively.

What is the length of this specific model?

This specific model has a length of 6 metres, which is approximately 19.7 feet. This provides a balance between mobility for the performer and signal integrity.

How does this cable compare to the Gear4Music Essentials range?

The Pro Cable features a braided exterior and a design focused on higher signal purity and lower noise. The Essentials range is typically designed for basic utility and consumer applications, such as RCA to Jack connections.

Is the signal output mono or stereo?

This cable provides a mono signal. TS (Tip-Sleeve) connectors are designed for single-channel unbalanced audio, which is the standard for almost all electric guitars.

Can I use this for balanced audio connections?

No, balanced connections typically require TRS (Tip-Ring-Sleeve) jacks or XLR connectors. For balanced needs, you would look at products like the Studiospares Standard XLR cable.

What is the typical price for this cable?

The typical price for this 6m braided cable is approximately GBP 9.00. This makes it a cost-effective professional-grade solution for musicians.

Does the cable include right-angled connectors?

Based on the standard product description, this cable features straight 6.35mm TS jacks. If you require a right-angled connection, you may need an adapter like the Neutrik NC3FRX or a different cable model like the Ernie Ball P06049.

Gear article

Gear4Music 6.35mm TS Jack Braided Pro Cable 6m

The Gear4Music 6.35mm TS Jack Braided Pro Cable 6m is a high-performance instrument cable designed for professional stage and studio environments. Engineered for signal purity, it features a low-capacitance braided design intended to maintain full dynamic range and frequency response across its six-metre length.

Gear4Music 6.35mm TS Jack - 6.35mm TS Jack Braided Pro Cable 6m

See live prices

Overview

The Gear4Music 6.35mm TS Jack Braided Pro Cable is a utility-focused audio interconnect designed to link instruments—such as electric guitars, basses, and synthesizers—to amplifiers, pedalboards, or audio interfaces. With a length of six metres, it provides sufficient slack for performers to move comfortably on stage while remaining practical for larger studio control rooms.

Technical Design and Features

Precision engineering is at the core of the Pro Cable's design. The manufacturer employs a low-capacitance architecture, which is critical for preserving high-frequency clarity that can otherwise be lost over longer cable runs. The braided exterior serves a dual purpose: it provides a robust physical barrier against wear and tear while simultaneously assisting in the rejection of electromagnetic interference and noise.

Studiospares Standard XLR (M) - XLR (F) Cable 60cm

Sonic Character

This cable is designed for transparency rather than coloration. By offering a full frequency response and maintaining dynamic range, it aims to replicate every nuance of the original audio source. This makes it suitable for musicians who require an unadulterated signal path from their instrument to their processing hardware or amplification.

Target Audience

The Pro Cable is positioned for both live and recording applications. Its 6m length makes it an ideal choice for guitarists and bassists performing on medium-to-large stages. Additionally, the braided design is often preferred by touring musicians for its tangle-resistant properties and increased durability compared to standard PVC-jacketed cables.

Market Comparison

Within the wider market of audio connectivity, this cable sits alongside other specialised leads such as the Ernie Ball P06049 10ft Straight-Angle Instrument Cable or Gear4Music's own Essentials range. While standard patch leads like the Studiospares 30cm XLR are designed for short interconnects, the 6m Braided Pro Cable is intended for long-reach instrument duties where signal integrity over distance is paramount. It offers a more robust build quality than the Gear4Music Essentials Dual Jack to RCA Phono Cable 3m, which is geared toward consumer-level hi-fi connections.

Related gear

Frequently asked questions

What is the primary use for the Gear4Music Braided Pro Cable?: It is primarily used as an instrument cable to connect guitars, basses, or keyboards to amplifiers and interfaces. The 6m length makes it suitable for both studio recording and live stage performances.
What does TS stand for in the connector description?: TS stands for 'Tip-Sleeve', which refers to a mono 6.35mm (1/4 inch) jack. This is the standard connector type for most unbalanced instrument signals.
How does the braided design benefit the user?: The braided exterior offers increased physical durability compared to standard rubber or PVC cables. It also helps to prevent tangling and adds an extra layer of protection against external noise and interference.
Is this cable suitable for connecting speakers to an amplifier?: No, this is an instrument cable designed for low-power signals. You should use dedicated speaker cables for connecting amplifiers to passive speakers to avoid damage to your equipment.
Why is low capacitance important for a 6m cable?: Longer cables can act like a capacitor, which rolls off high-end frequencies. The low-capacitance design of this cable helps maintain a full frequency response and preserves the clarity of the instrument's signal.
Can I use this cable with an acoustic guitar?: Yes, provided the acoustic guitar has a standard 6.35mm (1/4 inch) jack output from a preamp or pickup system. It will transmit the signal to an acoustic amplifier or PA system effectively.
What is the length of this specific model?: This specific model has a length of 6 metres, which is approximately 19.7 feet. This provides a balance between mobility for the performer and signal integrity.
How does this cable compare to the Gear4Music Essentials range?: The Pro Cable features a braided exterior and a design focused on higher signal purity and lower noise. The Essentials range is typically designed for basic utility and consumer applications, such as RCA to Jack connections.
Is the signal output mono or stereo?: This cable provides a mono signal. TS (Tip-Sleeve) connectors are designed for single-channel unbalanced audio, which is the standard for almost all electric guitars.
Can I use this for balanced audio connections?: No, balanced connections typically require TRS (Tip-Ring-Sleeve) jacks or XLR connectors. For balanced needs, you would look at products like the Studiospares Standard XLR cable.
What is the typical price for this cable?: The typical price for this 6m braided cable is approximately GBP 9.00. This makes it a cost-effective professional-grade solution for musicians.
Does the cable include right-angled connectors?: Based on the standard product description, this cable features straight 6.35mm TS jacks. If you require a right-angled connection, you may need an adapter like the Neutrik NC3FRX or a different cable model like the Ernie Ball P06049.