How many pedals can this cable power?

This specific daisy chain is designed to power up to six effects pedals simultaneously from one power source. It features six individual output plugs connected in a parallel series.

What is the spacing between each plug?

There is a 30cm length of cable between each plug. This allows for standard pedal placement on a board without stretching the cable or putting stress on the pedal inputs.

Is this cable compatible with SubZero pedals?

Yes, it is explicitly described as an ideal accessory for the SubZero Micro Guitar Pedal range. It functions effectively with the compact form factor of those units.

What is the typical price for this accessory?

The Gear4music 6-Way Daisy Chain typically retails for around £5.00. This makes it a very affordable solution for power distribution.

Can I use this for bass pedals as well as guitar pedals?

Yes, the cable is designed for both guitarists and bassists. It is compatible with any standard effects pedal that matches the connector type and voltage.

Will this cable eliminate the need for multiple power adapters?

Yes, it allows you to replace up to six individual power adapters with one single power supply. This significantly reduces the number of mains sockets required at a gig or in the studio.

Does this cable come with a mains power supply?

No, this product is the daisy chain distribution cable only. You must connect it to an existing compatible power supply to provide electricity to your pedals.

What happens if I don't use all six plugs?

You do not need to use all six connectors for the cable to work. However, it is recommended to cover unused plugs with electrical tape to prevent them from touching metal surfaces and causing a short circuit.

Is the cable durable enough for gigging?

The cable is designed to be simple and effective for regular use. The 30cm spacing helps prevent the cable from being pulled out, which increases its reliability during live performances.

Can I link two of these daisy chains together?

While technically possible, it is not recommended unless your primary power supply has a very high current output. Overloading a single power supply can lead to noise or equipment failure.

Does this cable provide isolated power?

No, this is a standard daisy chain where all pedals share a common ground. For pedals that require isolated power to prevent ground loop hum, a dedicated isolated power brick would be a different alternative.

How does the length compare to standard patch cables?

At 30cm between plugs, it provides a similar reach to a standard 30cm patch cable like the Studiospares Standard XLR patch. This ensures the power cabling matches the layout of your audio cabling.

Gear article

Gear4music 6-Way Daisy Chain Power Supply Cable

The Gear4music 6-Way Daisy Chain is a power distribution cable designed to provide electrical current to up to six effects pedals from a single power source. It is an essential utility accessory for guitarists and bassists looking to simplify their pedalboard cabling and reduce the number of individual power adapters required.

See live prices

Overview

The 6-Way Daisy Chain Power Supply Cable by Gear4music is a functional solution for musicians utilizing multiple effects pedals. By linking several pedals to one mains power supply, it minimises clutter on the floor and reduces the demand for multiple power sockets. It is specifically designed to handle standard pedalboard configurations, particularly those utilizing compact units like the SubZero Micro Guitar Pedal range.

Design and Utility

A primary feature of this cable is the generous 30cm spacing between each of the six plugs. This specific length allows for standard pedal spacing on a board without placing undue tension on the inputs. The design ensures that the cable remains secure during performance, preventing accidental disconnection that can occur with shorter, more rigid alternatives. The flexibility of the cable facilitates neat routing around other hardware components.

Compatibility and Performance

While it is marketed as an ideal accessory for the SubZero Micro series, the daisy chain is compatible with a wide range of standard 9V DC guitar and bass pedals. Users must ensure that their primary power supply has a sufficient milliamp (mA) rating to cover the total current draw of all six connected pedals combined. It provides a direct, transparent electrical connection without altering the signal path of the audio itself.

Market Position and Comparisons

Positioned at a highly accessible price point of approximately £5, this cable serves as a budget-friendly alternative to isolated power bricks or more expensive brand-name distribution leads. While professional setups might utilize high-end filtered power supplies, this Gear4music utility cable is a practical choice for home practice, rehearsals, and smaller gigging setups where space and simplicity are prioritized. It sits alongside other essential cabling products such as the Studiospares Standard XLR or Gear4music Essentials RCA cables in a musician's toolkit.

Related gear

Frequently asked questions

How many pedals can this cable power?: This specific daisy chain is designed to power up to six effects pedals simultaneously from one power source. It features six individual output plugs connected in a parallel series.
What is the spacing between each plug?: There is a 30cm length of cable between each plug. This allows for standard pedal placement on a board without stretching the cable or putting stress on the pedal inputs.
Is this cable compatible with SubZero pedals?: Yes, it is explicitly described as an ideal accessory for the SubZero Micro Guitar Pedal range. It functions effectively with the compact form factor of those units.
What is the typical price for this accessory?: The Gear4music 6-Way Daisy Chain typically retails for around £5.00. This makes it a very affordable solution for power distribution.
Can I use this for bass pedals as well as guitar pedals?: Yes, the cable is designed for both guitarists and bassists. It is compatible with any standard effects pedal that matches the connector type and voltage.
Will this cable eliminate the need for multiple power adapters?: Yes, it allows you to replace up to six individual power adapters with one single power supply. This significantly reduces the number of mains sockets required at a gig or in the studio.
Does this cable come with a mains power supply?: No, this product is the daisy chain distribution cable only. You must connect it to an existing compatible power supply to provide electricity to your pedals.
What happens if I don't use all six plugs?: You do not need to use all six connectors for the cable to work. However, it is recommended to cover unused plugs with electrical tape to prevent them from touching metal surfaces and causing a short circuit.
Is the cable durable enough for gigging?: The cable is designed to be simple and effective for regular use. The 30cm spacing helps prevent the cable from being pulled out, which increases its reliability during live performances.
Can I link two of these daisy chains together?: While technically possible, it is not recommended unless your primary power supply has a very high current output. Overloading a single power supply can lead to noise or equipment failure.
Does this cable provide isolated power?: No, this is a standard daisy chain where all pedals share a common ground. For pedals that require isolated power to prevent ground loop hum, a dedicated isolated power brick would be a different alternative.
How does the length compare to standard patch cables?: At 30cm between plugs, it provides a similar reach to a standard 30cm patch cable like the Studiospares Standard XLR patch. This ensures the power cabling matches the layout of your audio cabling.