What is the primary use for the Adam Hall 4-Pole Speaker Cable?

It is primarily used to connect power amplifiers to loudspeakers in professional audio setups. The 4-pole design specifically allows for bi-amping, sending separate high and low frequency signals through one cable.

How long is this specific cable model?

This specific model has a length of 3 metres. This makes it suitable for short-distance connections, such as linking an amplifier rack to a nearby stage monitor or speaker.

What material is used for the outer jacket?

The cable features a rugged PVC jacket. This material is chosen for its durability and its ability to remain highly flexible for easy manipulation in various setups.

Can this cable be used for bi-amping?

Yes, the 4-pole connector is designed specifically to allow for splitting high and low frequencies. This eliminates the need for two separate cables when using bi-amplified speaker systems.

Is the cable flexible enough for tight spaces?

Yes, the manufacturer describes the cable as highly flexible. It can be easily manipulated into different positions to accommodate complex or crowded equipment configurations.

What are the benefits of the 4-pole connector over a 2-pole version?

A 4-pole connector allows for two separate signal paths within a single lead. This saves space, reduces setup time, and supports advanced speaker configurations that 2-pole cables cannot.

How much does the Adam Hall 4-Pole Speaker Cable typically cost?

The typical price range for this cable is approximately £20.00. This places it in a professional but accessible price bracket for high-quality audio accessories.

Does this cable provide good signal transmission?

Yes, it is precisely crafted for optimal contact. The design focuses on ensuring exceptional signal transmission for professional-grade audio performance.

Can I use this cable for my electric guitar?

No, this is a speaker cable intended for high-level signals between an amp and a speaker. For instruments, a shielded cable like the Ernie Ball P06049 instrument cable should be used instead.

Is the PVC jacket reliable for touring?

The rugged PVC jacket is specifically designed to be long-lasting and reliable for repeated use. It is built to withstand the rigours of professional environments and frequent setups.

How does this cable help with cable management?

By combining two frequency signals into one 4-pole lead, it reduces the total number of cables needed. This leads to a cleaner setup and less clutter on stage or in the studio.

Who is the manufacturer of this cable?

The cable is manufactured by Adam Hall, a brand known for producing professional-grade audio and event equipment hardware.

Gear article

Adam Hall 4-Pole Speaker Cable 3m

The Adam Hall 4-Pole Speaker Cable is a professional-grade 3-metre audio lead designed for high-performance signal transmission in live sound and studio environments. It features a 4-pole connector configuration that allows for bi-amping, enabling the transmission of high and low frequencies through a single cable.

See live prices

Overview and Construction

The Adam Hall 4-Pole Speaker Cable is engineered for durability and reliability in demanding professional audio applications. At a length of 3 metres, it provides a balance between reach and cable management for compact stages or studio racks. The cable is encased in a rugged PVC jacket, which offers protection against mechanical stress while remaining highly flexible. This flexibility allows users to manipulate the cable into specific positions to suit various equipment layouts without compromising the integrity of the internal conductors.

4-Pole Functionality

The primary technical feature of this cable is its 4-pole speaker connector. Unlike standard 2-pole cables, the 4-pole design allows for the transmission of multiple signals. This is particularly useful for bi-amped systems where high and low frequency signals are sent separately to a speaker's drivers. By utilising a single 4-pole cable instead of two separate leads, users can significantly reduce cable clutter and decrease the time required for system setup and teardown.

Signal Integrity and Contact

Adam Hall has designed this cable with a focus on optimal contact and exceptional signal transmission. The precision-crafted connectors ensure a secure fit, reducing the risk of signal loss or intermittent connectivity during performance. The internal construction is optimized to handle the high current demands typical of speaker-level signals, ensuring that the audio output remains clear and consistent across the frequency spectrum.

Target Audience

This cable is suited for sound engineers, touring musicians, and installation professionals who require a dependable link between power amplifiers and loudspeakers. It is especially beneficial for those using modern PA systems that support 4-pole connections for bi-amplification. The 3-metre length makes it an ideal choice for connecting floor monitors to nearby stage boxes or linking amplifiers in a rack-mounted configuration.

Comparison to Alternatives

When compared to standard instrument cables like the Ernie Ball P06049 or microphone leads like the Studiospares Standard XLR, this Adam Hall cable is specifically built to handle the higher voltage and current of speaker signals. While 2-pole cables are common for simple full-range speakers, the Adam Hall 4-pole version provides the expanded utility necessary for complex crossovers and bi-amped cabinets, offering a more streamlined solution than running multiple dual-core cables.

Related gear

Frequently asked questions

What is the primary use for the Adam Hall 4-Pole Speaker Cable?: It is primarily used to connect power amplifiers to loudspeakers in professional audio setups. The 4-pole design specifically allows for bi-amping, sending separate high and low frequency signals through one cable.
How long is this specific cable model?: This specific model has a length of 3 metres. This makes it suitable for short-distance connections, such as linking an amplifier rack to a nearby stage monitor or speaker.
What material is used for the outer jacket?: The cable features a rugged PVC jacket. This material is chosen for its durability and its ability to remain highly flexible for easy manipulation in various setups.
Can this cable be used for bi-amping?: Yes, the 4-pole connector is designed specifically to allow for splitting high and low frequencies. This eliminates the need for two separate cables when using bi-amplified speaker systems.
Is the cable flexible enough for tight spaces?: Yes, the manufacturer describes the cable as highly flexible. It can be easily manipulated into different positions to accommodate complex or crowded equipment configurations.
What are the benefits of the 4-pole connector over a 2-pole version?: A 4-pole connector allows for two separate signal paths within a single lead. This saves space, reduces setup time, and supports advanced speaker configurations that 2-pole cables cannot.
How much does the Adam Hall 4-Pole Speaker Cable typically cost?: The typical price range for this cable is approximately £20.00. This places it in a professional but accessible price bracket for high-quality audio accessories.
Does this cable provide good signal transmission?: Yes, it is precisely crafted for optimal contact. The design focuses on ensuring exceptional signal transmission for professional-grade audio performance.
Can I use this cable for my electric guitar?: No, this is a speaker cable intended for high-level signals between an amp and a speaker. For instruments, a shielded cable like the Ernie Ball P06049 instrument cable should be used instead.
Is the PVC jacket reliable for touring?: The rugged PVC jacket is specifically designed to be long-lasting and reliable for repeated use. It is built to withstand the rigours of professional environments and frequent setups.
How does this cable help with cable management?: By combining two frequency signals into one 4-pole lead, it reduces the total number of cables needed. This leads to a cleaner setup and less clutter on stage or in the studio.
Who is the manufacturer of this cable?: The cable is manufactured by Adam Hall, a brand known for producing professional-grade audio and event equipment hardware.