What is included in the Adam Hall 4911M4AH package?

The package contains exactly four rubber feet. This is sufficient for one standard rectangular rack case or flight case.

What materials are used to make these feet?

These feet are constructed from soft PVC for external grip and a polypropylene (PP) core for structural strength. This combination provides both durability and surface protection.

Are these feet compatible with non-Adam Hall cases?

Yes, while designed for Adam Hall rack cases, they can be used to add or replace feet on any suitable flight case or equipment rack. They are universal hardware components.

Do these feet prevent cases from sliding?

Yes, the soft PVC material is designed to grip surfaces. This allows you to place your case on the ground without it moving around during use.

Will these feet damage the floor?

No, they are specifically designed to prevent damage. The soft material allows the case to sit on the floor without scratching or scuffing the surface.

What is the typical price for a pack of 4911M4AH feet?

The typical price range for this product is approximately GBP 3.00. Prices may vary slightly depending on the retailer.

Can these be used for heavy rack cases?

Yes, the PP core is designed to be 'made to last' and support the weight of professional rack and flight cases. The rigid core prevents the foot from flattening under heavy loads.

Are these feet intended for instrument cases like violin or trumpet cases?

No, these are heavy-duty feet for rack and flight cases. They are not intended for lightweight instrument cases like those produced by BAM or Gear4Music.

How do you install the Adam Hall 4911M4AH feet?

They are typically installed by bolting or screwing them into the bottom of a case. Note that mounting hardware like screws or bolts is generally not included in the bag of four.

What is the primary benefit of the PP core?

The polypropylene (PP) core provides the internal stability required for the foot. It ensures the foot maintains its shape even when supporting heavy rack equipment.

Is the PVC material hard or soft?

The manufacturer describes the PVC as 'soft'. This softness is essential for providing the non-slip qualities and protecting floors from scratches.

Can these be used to replace existing feet?

Yes, they are marketed as a solution to replace other rubber feet that may have become worn, damaged, or lost over time. They are standard utility replacements.

Gear article

Adam Hall 4911M4AH Rubber Case Feet

The Adam Hall 4911M4AH is a set of four replacement rubber feet specifically designed for use with rack and flight cases. Constructed from soft PVC with a polypropylene (PP) core, they provide stability and surface protection for professional audio and transport equipment.

See live prices

Overview

The Adam Hall 4911M4AH is a functional hardware accessory designed for the maintenance and customisation of professional equipment housing. Sold as a pack of four, these feet are primarily intended for rack cases, providing a buffer between the heavy equipment and the floor or stage surface.

By elevating the case slightly, these feet ensure that the underside of the flight case is protected from moisture, debris, and direct impact. They serve as a critical component for technicians and musicians who require their gear to remain stationary and secure during use.

Construction and Design

These feet utilise a dual-material construction method to balance durability with grip. The outer layer is made from a soft PVC (polyvinyl chloride), which offers the high-friction surface necessary to prevent sliding on smooth stages or studio floors.

Internally, the feet feature a polypropylene (PP) core. This rigid core provides the structural integrity needed to support the significant weight of fully loaded rack units without the foot collapsing or deforming over time. This combination of materials ensures the feet are long-lasting even under heavy touring conditions.

Key Features and Utility

The primary utility of the 4911M4AH set is twofold: stability and surface protection.

Non-slip Performance: The soft PVC grip prevents cases from moving around during operation, which is particularly important for equipment that may vibrate or for cases stacked on top of one another.
Floor Protection: The soft material ensures that heavy flight cases do not scratch, scuff, or otherwise damage delicate flooring in venues or recording studios.
Versatility: While designed for Adam Hall rack cases, they are suitable for a wide variety of custom-built flight cases or for replacing lost feet on existing hardware.

Comparison and Suitability

In the market for case hardware, the Adam Hall 4911M4AH is positioned as a budget-friendly, essential utility item. Unlike high-end specialized bags such as the BAM Conservatoire or Artisto violin cases, which offer comprehensive protection for delicate instruments, these feet are intended for the exterior maintenance of rugged equipment transport shells.

They are most suitable for DIY case builders, studio owners, and touring technicians who need to refresh their hardware to maintain the safety and professional appearance of their rack rigs. At a typical price point of approximately £3.00, they represent a cost-effective alternative to purchasing proprietary manufacturer-specific feet for various third-party rack brands.

Related gear

Frequently asked questions

What is included in the Adam Hall 4911M4AH package?: The package contains exactly four rubber feet. This is sufficient for one standard rectangular rack case or flight case.
What materials are used to make these feet?: These feet are constructed from soft PVC for external grip and a polypropylene (PP) core for structural strength. This combination provides both durability and surface protection.
Are these feet compatible with non-Adam Hall cases?: Yes, while designed for Adam Hall rack cases, they can be used to add or replace feet on any suitable flight case or equipment rack. They are universal hardware components.
Do these feet prevent cases from sliding?: Yes, the soft PVC material is designed to grip surfaces. This allows you to place your case on the ground without it moving around during use.
Will these feet damage the floor?: No, they are specifically designed to prevent damage. The soft material allows the case to sit on the floor without scratching or scuffing the surface.
What is the typical price for a pack of 4911M4AH feet?: The typical price range for this product is approximately GBP 3.00. Prices may vary slightly depending on the retailer.
Can these be used for heavy rack cases?: Yes, the PP core is designed to be 'made to last' and support the weight of professional rack and flight cases. The rigid core prevents the foot from flattening under heavy loads.
Are these feet intended for instrument cases like violin or trumpet cases?: No, these are heavy-duty feet for rack and flight cases. They are not intended for lightweight instrument cases like those produced by BAM or Gear4Music.
How do you install the Adam Hall 4911M4AH feet?: They are typically installed by bolting or screwing them into the bottom of a case. Note that mounting hardware like screws or bolts is generally not included in the bag of four.
What is the primary benefit of the PP core?: The polypropylene (PP) core provides the internal stability required for the foot. It ensures the foot maintains its shape even when supporting heavy rack equipment.
Is the PVC material hard or soft?: The manufacturer describes the PVC as 'soft'. This softness is essential for providing the non-slip qualities and protecting floors from scratches.
Can these be used to replace existing feet?: Yes, they are marketed as a solution to replace other rubber feet that may have become worn, damaged, or lost over time. They are standard utility replacements.