What is the primary material used for this ball corner?

The corner is constructed from galvanised steel, providing high strength and resistance to corrosion.

What does '30 mm inside radius' mean?

This refers to the curvature of the inner part of the corner, indicating it is designed to fit case edges with a matching 30 mm curve.

How many sides of the case does this hardware attach to?

The hardware features attachment holes that fix to all three sides of a flight case corner for maximum stability.

Is this corner suitable for small briefcase-style cases?

This is a 'Large' model, typically intended for heavier touring cases rather than small, lightweight briefcases.

Does the 'cranked' design offer any specific benefit?

Yes, the cranked design allows the hardware to fit securely over case profiles and extrusions, providing a more flush and integrated fit.

Can this be used on a wooden case without aluminium edging?

While possible, it is designed to work as part of a system involving aluminium extrusions for professional flight case assembly.

How is the ball corner typically fixed to the case?

It is generally fixed using rivets or bolts through the pre-drilled holes on all three faces.

What is the benefit of a 'ball' shape over a flat corner?

The ball shape helps deflect impacts and prevents the case from catching on other objects during transit.

Is this product sold individually or in sets?

It is typically sold as a single unit, allowing builders to purchase the exact number required for their specific case design.

Does this hardware require special maintenance?

The galvanised finish is designed to be maintenance-free, though it should be checked periodically for physical deformation after heavy impacts.

Is this compatible with 9 mm plywood?

Yes, large ball corners of this type are standard for use with 9 mm and 12 mm plywood case panels.

Who is the manufacturer of this hardware?

The product is manufactured by Adam Hall, a brand known for professional-grade flight case components and accessories.

Gear article

Adam Hall Large Cranked Flight Case Ball Corner (30 mm)

The Adam Hall Large Cranked Flight Case Ball Corner is a robust hardware component designed for the construction and reinforcement of professional transport cases. Built from galvanised steel, it features a 30 mm inside radius and a three-sided attachment design to ensure structural integrity for heavy-duty touring equipment.

See live prices

Overview

The Adam Hall Large Cranked Flight Case Ball Corner is a fundamental piece of hardware within the 'Cases & bags' category. It is specifically engineered to protect the corners of flight cases, which are the points most vulnerable to impact during transit. By utilising a 'cranked' design, the component fits securely over the meeting point of three case edges, providing a physical buffer against collisions.

The component is manufactured from galvanised steel, a material selected for its durability and resistance to environmental wear. This makes it an essential choice for builders looking to create long-lasting protection for musical instruments, amplifiers, and rack gear.

Design and Functionality

This hardware piece is defined by its 30 mm inside radius, which dictates the curvature of the case edges it can accommodate. The 'cranked' nature of the ball corner refers to its offset shape, which allows it to sit flush against the case profile.

Key functional features include: * Three-Sided Attachment: The corner includes pre-drilled holes that allow it to be fixed to all three planes of a case corner simultaneously. This creates a reinforced structural bond that prevents the case panels from separating under stress. * Galvanised Finish: The steel is treated to prevent rust and corrosion, ensuring the hardware remains functional even after exposure to damp or varied stage environments. * Heavy-Duty Construction: The thickness and weight of the steel are intended to withstand significant force, redirecting impact energy away from the internal contents of the case.

Structural Character

Unlike decorative corners, the Adam Hall Large Cranked Ball Corner is characterised by its industrial utility. The 'ball' shape is not merely aesthetic; it serves as a shock absorber. When a case is dropped or struck, the rounded surface of the ball corner ensures that the force is distributed across the steel surface rather than being concentrated on a single sharp point. This design also facilitates the 'stackability' of cases, as the rounded corners allow cases to slide against one another without snagging.

Suitability and Applications

This component is primarily suited for DIY case builders and professional flight case manufacturers. It is appropriate for large-format cases, such as those housing drum kits, bass amplifiers, or heavy mixing consoles. Because of its large size and 30 mm radius, it is best paired with larger aluminium extrusions and thicker plywood panels (typically 9mm or 12mm).

While smaller cases might use flat or smaller-radius corners, the Large Cranked Ball Corner is the standard for 'tour-grade' equipment where maximum durability is the priority.

Comparison to Alternatives

When compared to alternative hardware such as the flat corners found on lightweight cases or soft-sided bags like the Latin Percussion LP Cajon Bag or Gear4Music Rock Fusion Drum Bag, the Adam Hall Ball Corner offers significantly higher mechanical protection.

Compared to other Adam Hall components, the 30 mm inside radius is larger than standard 'small' ball corners, making it more compatible with heavy-duty profiles. While premium violin cases like the BAM Hightech or Artisto series rely on internal suspension and high-tech shells for protection, flight cases built with Adam Hall hardware rely on the external 'armour' provided by these steel reinforcements.

Related gear

Frequently asked questions

What is the primary material used for this ball corner?: The corner is constructed from galvanised steel, providing high strength and resistance to corrosion.
What does '30 mm inside radius' mean?: This refers to the curvature of the inner part of the corner, indicating it is designed to fit case edges with a matching 30 mm curve.
How many sides of the case does this hardware attach to?: The hardware features attachment holes that fix to all three sides of a flight case corner for maximum stability.
Is this corner suitable for small briefcase-style cases?: This is a 'Large' model, typically intended for heavier touring cases rather than small, lightweight briefcases.
Does the 'cranked' design offer any specific benefit?: Yes, the cranked design allows the hardware to fit securely over case profiles and extrusions, providing a more flush and integrated fit.
Can this be used on a wooden case without aluminium edging?: While possible, it is designed to work as part of a system involving aluminium extrusions for professional flight case assembly.
How is the ball corner typically fixed to the case?: It is generally fixed using rivets or bolts through the pre-drilled holes on all three faces.
What is the benefit of a 'ball' shape over a flat corner?: The ball shape helps deflect impacts and prevents the case from catching on other objects during transit.
Is this product sold individually or in sets?: It is typically sold as a single unit, allowing builders to purchase the exact number required for their specific case design.
Does this hardware require special maintenance?: The galvanised finish is designed to be maintenance-free, though it should be checked periodically for physical deformation after heavy impacts.
Is this compatible with 9 mm plywood?: Yes, large ball corners of this type are standard for use with 9 mm and 12 mm plywood case panels.
Who is the manufacturer of this hardware?: The product is manufactured by Adam Hall, a brand known for professional-grade flight case components and accessories.