What is the primary material used for this corner?

The corner is manufactured from galvanised steel, which provides a balance of high structural strength and resistance to rust and corrosion.

How many mounting holes are present on the hardware?

There are six mounting holes in total, with two holes located on each of the three legs for a secure three-way attachment.

What is the benefit of a 'ball' corner design?

The rounded ball design helps to absorb and deflect impacts, preventing the corner of the case from digging into surfaces or catching on other cases during transport.

Is this corner suitable for small instrument cases?

This is a 'Large' square corner, meaning it is best suited for medium to large-scale flight cases rather than small, slimline instrument containers.

Can these corners be used to repair existing cases?

Yes, they are ideal for replacing damaged hardware on existing professional flight cases, provided the dimensions match the original corner profile.

What does 'three-leg' refer to in the product name?

It refers to the three distinct flanges or 'legs' that wrap around the 90-degree junction where three panels of a flight case meet.

Is the mounting hardware included?

Typically, Adam Hall corners are sold as individual hardware pieces; rivets or screws for mounting must usually be purchased separately to match the case wall thickness.

How does this compare to a plastic corner?

Galvanised steel corners are significantly more durable than plastic alternatives and are required for 'flight-ready' cases intended for heavy industrial use.

What is the typical price for a single corner?

The typical price for this specific Adam Hall hardware component is approximately £2.00 per unit.

Does the galvanised finish affect the appearance?

Yes, it provides a bright, metallic silver industrial finish that is standard for professional road and flight cases.

Can these be stacked?

While these are standard ball corners, they provide a stable base for stacking; however, specialised 'stacking' ball corners with indentations exist for specific interlocking needs.

Who is the manufacturer of this hardware?

This component is manufactured by Adam Hall, a company specialising in hardware and accessories for the event technology and music industries.

Gear article

Adam Hall Large Square Three Leg Flight Case Ball Corner

The Adam Hall Large Square Three Leg Flight Case Ball Corner is a heavy-duty hardware component designed for the reinforcement and protection of professional flight cases. Constructed from galvanised steel, this three-leg corner provides a robust shielding mechanism for case joints against impact during transit.

See live prices

Overview

The Adam Hall Large Square Three Leg Flight Case Ball Corner is an essential piece of hardware for the construction and repair of touring cases. As a 'three-leg' component, it is designed to sit at the junction of three perpendicular edges, providing structural integrity to the corners which are the most vulnerable points of any equipment enclosure.

Adam Hall is a recognised industry standard for flight case components, and this specific model is designed to meet the rigorous demands of professional touring environments. The use of galvanised steel ensures longevity and resistance to corrosion, maintaining the case's structural health over time.

Design and Construction

The corner features a large square profile, providing a significant surface area for impact distribution. Each of the three legs contains two pre-drilled holes, allowing for a total of six mounting points per corner. This design ensures that the hardware remains securely fastened to the wooden or composite panels of the flight case even under high stress.

The 'ball' design is intentional; the rounded protruding surface helps to deflect impacts and allows cases to be slid or stacked more easily without catching on edges. The galvanised finish provides a classic industrial aesthetic while serving as a functional barrier against moisture and wear.

Fender Vintage Precision Bass Pickup Cover Chrome

Technical Features

Key technical specifications include:

Material: High-grade galvanised steel for maximum durability.
Mounting: Six-hole configuration (two holes per side) for secure installation.
Shape: Three-leg square design specifically for standard 90-degree case corners.
Size: Large format, suitable for medium to large touring racks, trunk cases, and speaker cabinets.

Target User

This hardware is primarily suited for professional case builders, backline technicians, and DIY enthusiasts who are constructing their own protective enclosures for musical instruments or sensitive electronics. Because it is sold as a standalone component at an accessible price point (typically around £2), it is also ideal for the maintenance and repair of existing professional flight cases that have suffered damage to their original corners.

Comparison and Alternatives

Within the ecosystem of protective gear, this component is a build-level item rather than a finished product. While companies like BAM produce high-end finished violin and cello cases (such as the L'Etoile Hightech Slim Cello Case or the Artisto Oblong Violin Case), those are pre-manufactured luxury solutions.

In contrast, Adam Hall hardware allows for the creation of custom-sized road cases that can house everything from Fender Precision Basses to large drum kits. Compared to lightweight bags like the Latin Percussion LP Cajon Bag or Gear4Music Rock Fusion Drum Bag Set, a case built with Adam Hall ball corners offers significantly higher levels of impact protection and stackability for heavy touring schedules.

Related gear

Frequently asked questions

What is the primary material used for this corner?: The corner is manufactured from galvanised steel, which provides a balance of high structural strength and resistance to rust and corrosion.
How many mounting holes are present on the hardware?: There are six mounting holes in total, with two holes located on each of the three legs for a secure three-way attachment.
What is the benefit of a 'ball' corner design?: The rounded ball design helps to absorb and deflect impacts, preventing the corner of the case from digging into surfaces or catching on other cases during transport.
Is this corner suitable for small instrument cases?: This is a 'Large' square corner, meaning it is best suited for medium to large-scale flight cases rather than small, slimline instrument containers.
Can these corners be used to repair existing cases?: Yes, they are ideal for replacing damaged hardware on existing professional flight cases, provided the dimensions match the original corner profile.
What does 'three-leg' refer to in the product name?: It refers to the three distinct flanges or 'legs' that wrap around the 90-degree junction where three panels of a flight case meet.
Is the mounting hardware included?: Typically, Adam Hall corners are sold as individual hardware pieces; rivets or screws for mounting must usually be purchased separately to match the case wall thickness.
How does this compare to a plastic corner?: Galvanised steel corners are significantly more durable than plastic alternatives and are required for 'flight-ready' cases intended for heavy industrial use.
What is the typical price for a single corner?: The typical price for this specific Adam Hall hardware component is approximately £2.00 per unit.
Does the galvanised finish affect the appearance?: Yes, it provides a bright, metallic silver industrial finish that is standard for professional road and flight cases.
Can these be stacked?: While these are standard ball corners, they provide a stable base for stacking; however, specialised 'stacking' ball corners with indentations exist for specific interlocking needs.
Who is the manufacturer of this hardware?: This component is manufactured by Adam Hall, a company specialising in hardware and accessories for the event technology and music industries.