What is the primary function of this Cameo adapter?

It is designed to convert an IP65-rated outdoor DMX connection to a standard 5-pin DMX connector. This allows users to link weather-sealed outdoor fixtures with standard indoor lighting controllers and cabling.

What does the IP65 rating signify for this cable?

The IP65 rating indicates that the adapter is completely protected against dust ingress (dust-tight) and is protected against low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.

How long is the Cameo AD Out IP65 adapter?

The cable length is exactly 1 metre, providing a short and manageable bridge between different connector types without adding significant bulk to the signal chain.

Can this adapter be used for permanent outdoor installations?

While it is rugged enough for outdoor use and carries an IP65 rating, it is typically used for temporary stage and event setups. For permanent installations, users should ensure all connections are properly sealed according to local electrical codes.

Is this adapter compatible with 3-pin DMX systems?

This specific model features a 5-pin DMX connector. To use it with 3-pin equipment, such as a Stagg Headbanger XT or certain Eurolite models, an additional 5-pin to 3-pin DMX converter would be required.

Does the adapter come in different lengths?

The manufacturer specifications for this specific model denote a 1-metre length. For longer distances, users typically connect this adapter to standard DMX extension cables.

Will this adapter work with wireless DMX systems?

Yes, it can be used to connect the wired output of a wireless receiver, such as a Chauvet DJ FlareCON Air 2, to an outdoor-rated fixture that requires an IP65 input.

What kind of DMX equipment can this adapter link?

It can link any standard DMX controller to IP65-rated fixtures like outdoor PAR cans, architectural washers, or weather-sealed moving heads. It acts as the physical translator for the data signal.

Is the cable shielding sufficient for high-interference environments?

Cameo designs these adapters for professional stage use, utilizing shielded cabling to prevent electromagnetic interference from affecting the DMX data signal. This ensures stable performance near power cables or wireless transmitters.

What is the price range for this adapter?

The typical price for the Cameo AD Out IP65 To 5 Pin DMX Adapter is approximately £9, making it an affordable utility for professional lighting kits.

Is the DMX connector male or female?

As an 'AD Out' adapter, it is designed to take the signal 'out' from an IP65 source or provide the connection to a standard DMX line. The specific gender configuration follows standard DMX signal flow conventions for output adapters.

Can this be used with the Cameo ROOT PAR 4?

If the ROOT PAR 4 or similar fixtures are being used in a setup requiring IP65 signal distribution, this adapter can be used to bridge the fixture into a standard 5-pin DMX network.

Gear article

Cameo AD Out IP65 to 5-Pin DMX Adapter (1m)

The Cameo AD Out IP65 to 5-Pin DMX Adapter is a 1-metre conversion cable designed to interface outdoor-rated lighting fixtures with standard 5-pin DMX equipment. It carries an IP65 rating, ensuring protection against dust ingress and low-pressure water spray for reliable performance in varied environments.

See live prices

Overview

The Cameo AD Out IP65 to 5-Pin DMX Adapter serves as a critical bridge in professional stage lighting configurations. Its primary function is to link specialized outdoor lighting fixtures, which often use proprietary or weather-sealed IP65 connectors, to standard DMX 5-pin infrastructure. Measuring one metre in length, it provides sufficient slack for cable management without introducing excessive signal resistance.

Construction and Environmental Protection

The cable is specifically engineered for durability in demanding scenarios. The IP65 rating denotes that the unit is 'dust-tight' and protected against water jets from any angle. This makes the adapter suitable for temporary outdoor installations, festivals, and architectural lighting where exposure to rain or particulate matter is a concern. The hybrid design features one ruggedised IP65 connector and one standard DMX connector, facilitating a secure link between sensitive indoor controllers and robust outdoor luminaires.

Compatibility and Applications

This adapter is essential for technical crews working with a mix of hardware. While many moving heads and battens like the Equinox Spectra Strobe or the Chauvet DJ Sentinel Wash utilize DMX protocols, their physical connection requirements may differ based on their environmental rating. The Cameo adapter ensures that controllers, such as the Chauvet DJ FlareCON Air 2, can communicate effectively with fixtures positioned in exposed locations.

Versatility and Utility

Beyond weatherproofing, the adapter offers a high degree of versatility for touring rigs. It allows lighting designers to integrate high-output outdoor effects into standard indoor stage setups without needing to replace entire cable runs. The rugged exterior is designed to withstand the physical stresses of frequent setup and teardown, protecting the internal copper conductors from mechanical failure.

Related gear

Frequently asked questions

What is the primary function of this Cameo adapter?: It is designed to convert an IP65-rated outdoor DMX connection to a standard 5-pin DMX connector. This allows users to link weather-sealed outdoor fixtures with standard indoor lighting controllers and cabling.
What does the IP65 rating signify for this cable?: The IP65 rating indicates that the adapter is completely protected against dust ingress (dust-tight) and is protected against low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
How long is the Cameo AD Out IP65 adapter?: The cable length is exactly 1 metre, providing a short and manageable bridge between different connector types without adding significant bulk to the signal chain.
Can this adapter be used for permanent outdoor installations?: While it is rugged enough for outdoor use and carries an IP65 rating, it is typically used for temporary stage and event setups. For permanent installations, users should ensure all connections are properly sealed according to local electrical codes.
Is this adapter compatible with 3-pin DMX systems?: This specific model features a 5-pin DMX connector. To use it with 3-pin equipment, such as a Stagg Headbanger XT or certain Eurolite models, an additional 5-pin to 3-pin DMX converter would be required.
Does the adapter come in different lengths?: The manufacturer specifications for this specific model denote a 1-metre length. For longer distances, users typically connect this adapter to standard DMX extension cables.
Will this adapter work with wireless DMX systems?: Yes, it can be used to connect the wired output of a wireless receiver, such as a Chauvet DJ FlareCON Air 2, to an outdoor-rated fixture that requires an IP65 input.
What kind of DMX equipment can this adapter link?: It can link any standard DMX controller to IP65-rated fixtures like outdoor PAR cans, architectural washers, or weather-sealed moving heads. It acts as the physical translator for the data signal.
Is the cable shielding sufficient for high-interference environments?: Cameo designs these adapters for professional stage use, utilizing shielded cabling to prevent electromagnetic interference from affecting the DMX data signal. This ensures stable performance near power cables or wireless transmitters.
What is the price range for this adapter?: The typical price for the Cameo AD Out IP65 To 5 Pin DMX Adapter is approximately £9, making it an affordable utility for professional lighting kits.
Is the DMX connector male or female?: As an 'AD Out' adapter, it is designed to take the signal 'out' from an IP65 source or provide the connection to a standard DMX line. The specific gender configuration follows standard DMX signal flow conventions for output adapters.
Can this be used with the Cameo ROOT PAR 4?: If the ROOT PAR 4 or similar fixtures are being used in a setup requiring IP65 signal distribution, this adapter can be used to bridge the fixture into a standard 5-pin DMX network.