What is the primary material used in the Decksaver LE Inpulse 300 cover?

The cover is constructed from a highly-durable polycarbonate shell. This material is chosen for its optimal strength and impact resistance.

Does this cover fit any other DJ controllers?

No, this specific model is a custom-moulded design intended exclusively for the Hercules DJ Control Inpulse 300. Using it with other controllers may result in an improper fit and reduced protection.

Can I leave my cables plugged in while the cover is on?

Yes, the cover features a precision-trimmed design specifically to accommodate cables. This allows the equipment to remain ready for use immediately after the cover is removed.

Does the purchase include the Hercules DJ Control Inpulse 300 hardware?

No, the product is a protective accessory only. The DJ controller must be purchased separately.

How does this cover protect against liquids?

The polycarbonate shell acts as a solid barrier that prevents liquid spills from reaching the sensitive electronics of the controller. It is effective against accidental splashes in home or club environments.

Is the cover transparent or opaque?

Decksaver covers are typically manufactured from a clear or smoked-tinted polycarbonate. This allows the user to see the condition of the controller while it is protected.

What is the typical price for this cover in the UK?

The typical price range for the Decksaver LE Hercules DJ Control Inpulse 300 Cover is approximately £34.00. Prices may vary slightly depending on the retailer.

Is this cover suitable for travel?

Yes, it is specifically designed to protect equipment while on the move. Its slim profile allows the covered controller to be placed inside a larger gig bag or backpack for extra safety.

Does the cover protect the faders and knobs from being bent?

Yes, the rigid polycarbonate shell is moulded to sit above the controls. This prevents external pressure from compressing or snapping the faders and knobs during transit.

How do I clean the Decksaver cover?

The cover can be cleaned using a soft cloth and mild soap or specialised plastic cleaners. Users should avoid abrasive materials that could scratch the polycarbonate surface.

What does the 'LE' in the product name stand for?

LE stands for 'Light Edition.' These versions are designed to be cost-effective while maintaining the essential protective qualities of the standard Decksaver range.

How does this compare to a standard flight case?

Unlike a bulky flight case, the Decksaver is lightweight and adds minimal volume to the controller. It offers a balance between high-level impact protection and portability.

Gear article

Decksaver LE Hercules DJ Control Inpulse 300 Cover

The Decksaver LE Hercules DJ Control Inpulse 300 Cover is a custom-moulded protective shell engineered specifically for the Hercules Inpulse 300 DJ controller. Constructed from durable polycarbonate, it provides a rigid barrier against environmental hazards and physical impact during storage and transport.

See live prices

Background and Design

Decksaver is a specialist manufacturer known for producing custom-fit protective covers for professional audio equipment. The LE (Light Edition) version for the Hercules DJ Control Inpulse 300 is designed to provide a high level of protection without the bulk of traditional flight cases. It is engineered to follow the exact contours of the Inpulse 300 hardware, ensuring that delicate controls such as faders, knobs, and jog wheels are shielded from external pressure.

Materials and Construction

The cover is manufactured from a clear, high-quality polycarbonate. This material is widely used in the production of bulletproof glass due to its high impact resistance and transparency. By using a moulded shell, the cover achieves a high strength-to-weight ratio, offering significant protection against accidental knocks and drops while remaining lightweight enough for mobile DJs.

Fender Vintage Precision Bass Pickup Cover Chrome

Key Features and Utility

A primary feature of the Decksaver design is its precision-trimmed edge. This allows the cover to sit flush against the controller while leaving sufficient clearance for connected cables. This design choice means the user does not need to unplug their setup to apply the protection, making it suitable for quick transitions in a booth or home studio environment. It effectively guards against:

Dust and airborne particulates
Liquid spills and moisture
Accidental impact during transit
Compression of sensitive faders and knobs

Comparison and Suitability

While soft bags like the Latin Percussion LP Cajon Bag or Gear4Music Rock Fusion Drum Bags offer general storage, they lack the rigid structural support provided by a custom-moulded shell. The Decksaver is specifically suited for owners of the Hercules Inpulse 300 who require a low-profile solution that can fit inside other carrying bags or be used as a standalone shield on a desk. Unlike generic cases, it ensures no contact is made with the controller's delicate surface components during transport.

Related gear

Frequently asked questions

What is the primary material used in the Decksaver LE Inpulse 300 cover?: The cover is constructed from a highly-durable polycarbonate shell. This material is chosen for its optimal strength and impact resistance.
Does this cover fit any other DJ controllers?: No, this specific model is a custom-moulded design intended exclusively for the Hercules DJ Control Inpulse 300. Using it with other controllers may result in an improper fit and reduced protection.
Can I leave my cables plugged in while the cover is on?: Yes, the cover features a precision-trimmed design specifically to accommodate cables. This allows the equipment to remain ready for use immediately after the cover is removed.
Does the purchase include the Hercules DJ Control Inpulse 300 hardware?: No, the product is a protective accessory only. The DJ controller must be purchased separately.
How does this cover protect against liquids?: The polycarbonate shell acts as a solid barrier that prevents liquid spills from reaching the sensitive electronics of the controller. It is effective against accidental splashes in home or club environments.
Is the cover transparent or opaque?: Decksaver covers are typically manufactured from a clear or smoked-tinted polycarbonate. This allows the user to see the condition of the controller while it is protected.
What is the typical price for this cover in the UK?: The typical price range for the Decksaver LE Hercules DJ Control Inpulse 300 Cover is approximately £34.00. Prices may vary slightly depending on the retailer.
Is this cover suitable for travel?: Yes, it is specifically designed to protect equipment while on the move. Its slim profile allows the covered controller to be placed inside a larger gig bag or backpack for extra safety.
Does the cover protect the faders and knobs from being bent?: Yes, the rigid polycarbonate shell is moulded to sit above the controls. This prevents external pressure from compressing or snapping the faders and knobs during transit.
How do I clean the Decksaver cover?: The cover can be cleaned using a soft cloth and mild soap or specialised plastic cleaners. Users should avoid abrasive materials that could scratch the polycarbonate surface.
What does the 'LE' in the product name stand for?: LE stands for 'Light Edition.' These versions are designed to be cost-effective while maintaining the essential protective qualities of the standard Decksaver range.
How does this compare to a standard flight case?: Unlike a bulky flight case, the Decksaver is lightweight and adds minimal volume to the controller. It offers a balance between high-level impact protection and portability.