What instruments does this cover fit?

It is specifically designed for the Moog Mother-32 and the Moog DFAM (Drummer From Another Mother). Both units share the same 60HP chassis dimensions.

What is the typical price for this Decksaver?

The typical price range for this specific model is approximately £39.

What material is the cover made from?

It is made from high-quality, clear polycarbonate, which provides high impact resistance and durability.

Does 'Soft Fit' mean the plastic is flexible?

No, the cover is made of rigid polycarbonate. 'Soft Fit' refers to the engineered fitment and contact points designed to be gentler on the instrument's surface while maintaining a secure grip.

Can I leave my patch cables plugged in with the cover on?

While the cover is designed to fit over the controls, tall patch cables or complex configurations may need to be thinned out or removed for the cover to sit perfectly flush against the chassis.

Does this cover protect against liquids?

Yes, it provides a solid barrier against accidental liquid spills, preventing them from entering the sensitive electronics or patch holes.

Is this cover suitable for travel?

Yes, it is specifically described as ideal for protecting equipment from the 'rigours of the tour' and provides security for the road.

How does this compare to a violin case like the BAM 2002B?

A violin case is a complete enclosure for transport, whereas the Decksaver is a form-fitting shield for the top surface of the synth. They serve different roles in equipment protection.

Does it protect the sides of the Moog wood panels?

The Decksaver primarily covers the top faceplate and controls. While it offers some lateral protection, it is designed to sit on top of the unit rather than encompassing the wooden end cheeks entirely.

Is the cover transparent?

Yes, it features a clear/smoked transparency that allows you to see the instrument's settings and aesthetic while it is protected.

Will this fit the Moog Subharmonicon?

Since the Moog Subharmonicon uses the same 60HP chassis as the Mother-32 and DFAM, this cover is generally compatible with that model as well.

Can I stack other gear on top of the synthesizer when the cover is on?

Yes, the rigid polycarbonate allows for light stacking of other gear or laptops in a studio or transport setting without putting pressure on the synth's knobs.

Gear article

Decksaver Moog Mother-32 & DFAM Cover Soft Fit

The Decksaver Moog Mother-32 & DFAM Cover Soft Fit is a premium equipment protector designed specifically for Moog's 60HP semi-modular synthesizers. Constructed from durable polycarbonate, it offers robust shielding against dust, liquid spills, and accidental impacts while maintaining a slim, low-profile aesthetic. This 'Soft Fit' variant provides a secure interface with the instrument's chassis, making it an essential accessory for studio maintenance and transit.

See live prices

Overview

The Decksaver Moog Mother-32 & DFAM Cover Soft Fit is a custom-moulded protective shell engineered to fit the unique dimensions of Moog's compact Eurorack-compatible desktop units. As synthesizers featuring numerous exposed potentiometers, toggle switches, and patch points, the Mother-32 and DFAM are particularly susceptible to environment-based wear. This cover addresses those vulnerabilities by providing a hard-shell barrier that does not require the user to disconnect cables in many setups, depending on the patch height.

History and Background

Decksaver, a British brand based in Leeds, developed the 'Soft Fit' line to improve the interaction between hard plastic covers and delicate instrument finishes. Recognising the popularity of Moog’s 60HP format—starting with the Mother-32 and followed by the DFAM—the company created this specific mould to cater to the growing community of semi-modular synthesists. The goal was to provide 'tour-ready' protection that exceeds the capabilities of generic fabric dust covers.

Design and Key Features

The cover is manufactured from clear, high-grade polycarbonate, a material also utilized in the production of bulletproof glass. The 'Soft Fit' technology focuses on the points of contact between the cover and the synthesizer, ensuring a snug fit that prevents movement during transport. Key features include:

Impact Resistance: Deflects physical blows that could snap switches or damage the PCB.
Contamination Shield: Blocks dust, hair, and liquid ingress into the patch bay and fader slots.
Travel-Friendly Profile: The slim design allows the covered unit to fit inside most flight cases or backpacks alongside other gear.

Protection Character

Unlike soft gig bags or generic vinyl covers, the Decksaver provides a rigid structural reinforcement. It is designed to withstand the 'rigours of the tour', functioning as a sacrificial layer that absorbs scratches and pressure. While it is transparent, allowing the aesthetic of the Moog units to remain visible, its primary character is one of utility and ruggedness, ensuring the synthesizer remains in 'box-fresh' condition for longer periods.

Target Audience

This product is primarily aimed at Moog enthusiasts who own the Mother-32 or DFAM and wish to preserve the resale value and functionality of their instruments. It is particularly suited for touring musicians who need to stack gear in transit, as well as home studio users in environments prone to dust or accidental spills. It serves a different purpose than aesthetic covers like the Fender Vintage Precision Bass Pickup Cover or purely transport-focused solutions like the BAM Conservatoire Violin Case.

Comparison to Alternatives

Compared to fabric dust covers, the Decksaver offers significantly better protection against impact and liquid. While a dedicated flight bag like the Latin Percussion LP Cajon Bag or Gear4Music Rock Fusion Drum Bag Set provides total enclosure, they are bulky and do not allow the instrument to be used or displayed while protected. The Decksaver occupies a middle ground, offering the immediate access of a dust cover with the impact protection of a hard case. It is more specialized than generic hardware covers like the Gibson PRTR-040, as it is custom-moulded to a specific electronic interface.

Related gear

Frequently asked questions

What instruments does this cover fit?: It is specifically designed for the Moog Mother-32 and the Moog DFAM (Drummer From Another Mother). Both units share the same 60HP chassis dimensions.
What is the typical price for this Decksaver?: The typical price range for this specific model is approximately £39.
What material is the cover made from?: It is made from high-quality, clear polycarbonate, which provides high impact resistance and durability.
Does 'Soft Fit' mean the plastic is flexible?: No, the cover is made of rigid polycarbonate. 'Soft Fit' refers to the engineered fitment and contact points designed to be gentler on the instrument's surface while maintaining a secure grip.
Can I leave my patch cables plugged in with the cover on?: While the cover is designed to fit over the controls, tall patch cables or complex configurations may need to be thinned out or removed for the cover to sit perfectly flush against the chassis.
Does this cover protect against liquids?: Yes, it provides a solid barrier against accidental liquid spills, preventing them from entering the sensitive electronics or patch holes.
Is this cover suitable for travel?: Yes, it is specifically described as ideal for protecting equipment from the 'rigours of the tour' and provides security for the road.
How does this compare to a violin case like the BAM 2002B?: A violin case is a complete enclosure for transport, whereas the Decksaver is a form-fitting shield for the top surface of the synth. They serve different roles in equipment protection.
Does it protect the sides of the Moog wood panels?: The Decksaver primarily covers the top faceplate and controls. While it offers some lateral protection, it is designed to sit on top of the unit rather than encompassing the wooden end cheeks entirely.
Is the cover transparent?: Yes, it features a clear/smoked transparency that allows you to see the instrument's settings and aesthetic while it is protected.
Will this fit the Moog Subharmonicon?: Since the Moog Subharmonicon uses the same 60HP chassis as the Mother-32 and DFAM, this cover is generally compatible with that model as well.
Can I stack other gear on top of the synthesizer when the cover is on?: Yes, the rigid polycarbonate allows for light stacking of other gear or laptops in a studio or transport setting without putting pressure on the synth's knobs.