What specific controllers does this cover fit?

This Decksaver model is custom built specifically for the Pioneer DDJ-SR2 and the Pioneer DDJ-RR. It is not designed to fit other Pioneer models like the DDJ-SX or DDJ-SB series.

What material is the Decksaver made from?

The cover is manufactured from a durable polycarbonate shell. This material is known for its high impact resistance and transparency.

Does the cover protect against liquids?

Yes, it provides a high level of protection against accidental liquid spills and moisture. However, it is not a hermetically sealed unit and should not be submerged.

Can I leave my cables plugged in while using the cover?

Yes, the cover is precision trimmed to accommodate cables. This allows the controller to be ready for operation immediately upon removing the cover without reconnecting wires.

Will this cover fit inside a flight case?

Because of its low-profile design, it is generally compatible with many third-party flight cases and controller bags. It adds an extra layer of protection for the faders and knobs inside the case.

Is the Pioneer controller included in the purchase?

No, the Pioneer DDJ-SR2 or DDJ-RR controller is not included. The product is strictly the protective polycarbonate shell.

What is the typical price for this cover?

The typical price for this specific Decksaver model is approximately GBP 44. Prices may vary slightly depending on the retailer.

Does the cover protect against dust?

Yes, it is specifically designed to keep dust and debris out of the faders, jog wheels, and sensitive electronics. This helps prolong the lifespan of the hardware.

How does this compare to a standard gig bag?

Unlike a flexible gig bag, the Decksaver is a rigid shell that prevents mechanical pressure on knobs and faders. It offers better impact protection but does not include handles or storage for accessories.

Is the cover transparent?

Yes, the polycarbonate used is clear with a smoked tint. This allows you to see the controller's layout while it is being protected.

Is this cover suitable for use in a club environment?

Yes, it is designed for use at home, in the club, or on the road. It is particularly useful in booths where space is limited and spill risks are high.

Can this cover be used for the Pioneer DDJ-SR (Version 1)?

While the SR2 and RR are specifically mentioned, users should verify dimensions as this model is specifically marketed for the SR2 and RR layouts. The manufacturer description focuses on the SR2 and RR.

Gear article

Decksaver Pioneer DDJ-SR2 and DDJ-RR Cover

The Decksaver Pioneer DDJ-SR2 and DDJ-RR Cover is a custom-moulded protective shield designed specifically for two of Pioneer DJ’s mid-range controllers. Manufactured from high-durability polycarbonate, it serves as a robust barrier against environmental hazards such as dust, liquid spills, and impact damage.

See live prices

Background and Design

The Decksaver brand is established as a specialist in providing bespoke protection for electronic music equipment. This particular model is engineered to accommodate the specific dimensions and control layouts of the Pioneer DDJ-SR2 and DDJ-RR. Unlike generic soft bags, this cover is rigid and transparent, maintaining the aesthetic visibility of the unit while it is protected.

The design philosophy focuses on 'precision trimming,' ensuring that the shell follows the contours of the jog wheels, faders, and buttons closely without applying pressure to sensitive internal components. It is intended to remain on the device whenever the controller is not actively being used for a performance.

Key Features and Utility

The primary utility of the Decksaver cover lies in its balance between protection and accessibility.

Polycarbonate Construction: Utilises the same material used in bulletproof glass, offering high impact resistance.
Cable Management: The cover is shaped to allow cables to remain plugged into the rear I/O ports. This 'ready-for-operation' design means users do not need to dismantle their setup to apply protection.
Low Profile: The slim design allows the covered controller to fit into many existing third-party flight cases or padded gig bags, providing an extra layer of defense during transit.

Protective Capabilities

The cover acts as a shield against the three primary threats to DJ hardware: dust, liquid, and accidental impact. Dust accumulation in faders and underneath jog wheels is a common cause of mechanical failure; the Decksaver prevents this buildup. The liquid-resistant shell also protects against accidental spills in high-risk environments like DJ booths or home studios. Finally, the rigid polycarbonate prevents damage from objects dropped onto the controller's surface.

Comparison to Alternatives

When compared to soft-shell alternatives like the Latin Percussion LP Cajon Bag or general drum bags like the Rock Fusion Drum Bag Set, the Decksaver offers superior rigid protection and a smaller footprint. While a dedicated flight case provides the maximum level of transport security, it is significantly bulkier. The Decksaver occupies a middle ground, offering more protection than a simple dust cloth or soft bag while being more portable and convenient than a full wooden or plastic road case.

Related gear

Frequently asked questions

What specific controllers does this cover fit?: This Decksaver model is custom built specifically for the Pioneer DDJ-SR2 and the Pioneer DDJ-RR. It is not designed to fit other Pioneer models like the DDJ-SX or DDJ-SB series.
What material is the Decksaver made from?: The cover is manufactured from a durable polycarbonate shell. This material is known for its high impact resistance and transparency.
Does the cover protect against liquids?: Yes, it provides a high level of protection against accidental liquid spills and moisture. However, it is not a hermetically sealed unit and should not be submerged.
Can I leave my cables plugged in while using the cover?: Yes, the cover is precision trimmed to accommodate cables. This allows the controller to be ready for operation immediately upon removing the cover without reconnecting wires.
Will this cover fit inside a flight case?: Because of its low-profile design, it is generally compatible with many third-party flight cases and controller bags. It adds an extra layer of protection for the faders and knobs inside the case.
Is the Pioneer controller included in the purchase?: No, the Pioneer DDJ-SR2 or DDJ-RR controller is not included. The product is strictly the protective polycarbonate shell.
What is the typical price for this cover?: The typical price for this specific Decksaver model is approximately GBP 44. Prices may vary slightly depending on the retailer.
Does the cover protect against dust?: Yes, it is specifically designed to keep dust and debris out of the faders, jog wheels, and sensitive electronics. This helps prolong the lifespan of the hardware.
How does this compare to a standard gig bag?: Unlike a flexible gig bag, the Decksaver is a rigid shell that prevents mechanical pressure on knobs and faders. It offers better impact protection but does not include handles or storage for accessories.
Is the cover transparent?: Yes, the polycarbonate used is clear with a smoked tint. This allows you to see the controller's layout while it is being protected.
Is this cover suitable for use in a club environment?: Yes, it is designed for use at home, in the club, or on the road. It is particularly useful in booths where space is limited and spill risks are high.
Can this cover be used for the Pioneer DDJ-SR (Version 1)?: While the SR2 and RR are specifically mentioned, users should verify dimensions as this model is specifically marketed for the SR2 and RR layouts. The manufacturer description focuses on the SR2 and RR.