What is the primary material used in this Decksaver cover?

The cover is manufactured using extremely durable polycarbonate. This material is chosen for its high impact resistance and long-lasting protection qualities.

Which specific turntable models does this cover fit?

This cover is custom-built to fit the Reloop Turntable RP7000 and RP8000 models. It is precision-trimmed to ensure a snug and secure fit for these specific units.

Does the cover require cables to be disconnected before use?

No, the cover is precision-trimmed to accommodate cables. This allows the turntable to remain fully wired and ready for operation even when the cover is in place.

Is the Reloop turntable included with the purchase?

The Reloop RP7000 or RP8000 turntable is not included with this item. This product is a protective cover only, as indicated in the manufacturer's description.

What is the typical price for this Decksaver model?

The typical price range for this specific Decksaver cover is approximately GBP 41. Prices may vary slightly depending on the retailer.

What level of protection does the polycarbonate shell provide?

The polycarbonate shell provides excellent protection against dust, liquid spills, and accidental impact. It is designed to safeguard the platter, tonearm, and controls of the turntable.

Can this cover be used while the turntable is in use?

This cover is designed to protect the equipment when it is not in use. It must be removed to gain access to the platter, tonearm, and control buttons during a performance.

How does this compare to a soft bag like the Latin Percussion LP Cajon Bag?

Unlike a soft fabric bag, the Decksaver is a rigid shell that provides impact resistance. It is custom-moulded to the shape of the turntable rather than being a general-purpose carrying case.

Is the cover transparent?

Yes, Decksaver covers are typically made from a smoked or clear polycarbonate. This allows the user to see the condition and design of the turntable while it remains protected.

Is this cover suitable for travel?

While it provides significant protection, it is often used in conjunction with a flight case or padded bag for long-distance travel. Its slim design adds an extra layer of safety inside other cases.

Does it protect the tonearm assembly?

Yes, the custom-moulded design accounts for the height and position of the tonearm. It shields the delicate assembly from being bumped or accumulating dust.

How do I clean the Decksaver cover?

Because it is made of polycarbonate, it should be cleaned with a soft cloth and mild soap if necessary. Avoid abrasive cleaners that could scratch the surface of the plastic.

Gear article

Decksaver Reloop Turntable RP7000/8000 Cover

The Decksaver Reloop Turntable RP7000/8000 Cover is a precision-moulded protective shield designed specifically for Reloop RP7000 and RP8000 turntables. Manufactured from high-grade polycarbonate, it provides a durable barrier against dust, liquids, and impact while maintaining a low-profile aesthetic.

See live prices

Overview

The Decksaver Reloop Turntable RP7000/8000 Cover is a custom-engineered protective solution for professional DJ hardware. It is specifically designed to fit the contours of the Reloop RP7000 and RP8000 models, ensuring a snug fit that does not interfere with the turntable's external components. The cover serves as a primary defence mechanism for high-value DJ equipment, protecting sensitive internal components and external controls from environmental hazards when the unit is not in active use.

Material and Build Quality

The cover is constructed from polycarbonate, a material renowned for its extreme durability and impact resistance. This thermoplastic is frequently used in bulletproof glass manufacturing, providing a high level of protection without adding significant weight or bulk. The transparent finish allows the turntable's design to remain visible while it is being shielded from external elements.

Design and Utility

A key feature of the Decksaver design is its precision-trimmed edge. This allows the cover to sit flush against the turntable chassis while accommodating connected cables. DJs and producers can leave their setups fully wired, meaning the turntable is always ready for immediate operation once the cover is removed. The design focuses on balancing hardware safety with workflow efficiency, as it eliminates the need to disconnect power or signal cables for storage.

Target Audience

This product is primarily intended for professional DJs, music producers, and home enthusiasts who use Reloop's flagship turntable models. It is particularly useful in environments where dust accumulation is a concern, such as home studios, or in venues where equipment might be exposed to accidental liquid spills. Its lightweight and robust nature also makes it suitable for mobile DJs who require additional protection during transport between gigs.

Comparison to Alternatives

Unlike generic soft cases or drum bags, such as the Gear4Music Rock Fusion Drum Bag Set, the Decksaver provides a rigid, impact-resistant shell tailored to specific hardware dimensions. While luxury cases like the BAM Hightech series offer comprehensive transport protection for orchestral instruments, the Decksaver is designed for stationary or low-profile protection. It differs from standard component covers, like the Fender Vintage Precision Bass Pickup Cover, by offering full-surface protection rather than just shielding a specific electronic component.

Related gear

Frequently asked questions

What is the primary material used in this Decksaver cover?: The cover is manufactured using extremely durable polycarbonate. This material is chosen for its high impact resistance and long-lasting protection qualities.
Which specific turntable models does this cover fit?: This cover is custom-built to fit the Reloop Turntable RP7000 and RP8000 models. It is precision-trimmed to ensure a snug and secure fit for these specific units.
Does the cover require cables to be disconnected before use?: No, the cover is precision-trimmed to accommodate cables. This allows the turntable to remain fully wired and ready for operation even when the cover is in place.
Is the Reloop turntable included with the purchase?: The Reloop RP7000 or RP8000 turntable is not included with this item. This product is a protective cover only, as indicated in the manufacturer's description.
What is the typical price for this Decksaver model?: The typical price range for this specific Decksaver cover is approximately GBP 41. Prices may vary slightly depending on the retailer.
What level of protection does the polycarbonate shell provide?: The polycarbonate shell provides excellent protection against dust, liquid spills, and accidental impact. It is designed to safeguard the platter, tonearm, and controls of the turntable.
Can this cover be used while the turntable is in use?: This cover is designed to protect the equipment when it is not in use. It must be removed to gain access to the platter, tonearm, and control buttons during a performance.
How does this compare to a soft bag like the Latin Percussion LP Cajon Bag?: Unlike a soft fabric bag, the Decksaver is a rigid shell that provides impact resistance. It is custom-moulded to the shape of the turntable rather than being a general-purpose carrying case.
Is the cover transparent?: Yes, Decksaver covers are typically made from a smoked or clear polycarbonate. This allows the user to see the condition and design of the turntable while it remains protected.
Is this cover suitable for travel?: While it provides significant protection, it is often used in conjunction with a flight case or padded bag for long-distance travel. Its slim design adds an extra layer of safety inside other cases.
Does it protect the tonearm assembly?: Yes, the custom-moulded design accounts for the height and position of the tonearm. It shields the delicate assembly from being bumped or accumulating dust.
How do I clean the Decksaver cover?: Because it is made of polycarbonate, it should be cleaned with a soft cloth and mild soap if necessary. Avoid abrasive cleaners that could scratch the surface of the plastic.