What material is the Decksaver for the Roland SPD-SX Pro made from?

It is manufactured using polycarbonate, a high-strength plastic that provides a robust layer of protection against impact and liquids.

Does this cover fit the original Roland SPD-SX or only the Pro model?

This specific model is engineered to fit the Roland SPD-SX Pro. Because the Pro model has different dimensions and control layouts than the original SPD-SX, it is intended specifically for the Pro version.

Can I leave my cables plugged in while using the cover?

Yes, the cover is designed with extra room to accommodate necessary cables. This allows you to quickly set up or leave the unit wired in without removing the protection.

Is the cover suitable for use during transport?

The compact design allows it to stay in place even when the unit is placed inside a gig bag or case. This provides an extra layer of structural integrity during transit.

How does this cover protect against liquids?

The polycarbonate shell acts as a barrier that deflects spills and moisture away from the pads and internal electronics. This is particularly useful in live environments where drinks may be present.

What is the typical price for this cover in the UK?

The typical price range for the Decksaver Roland SPD-SX Pro Cover is approximately £45.

Will this cover protect my device from dust?

Yes, it is designed to shield the unit from dust and debris when left set up in a studio or on stage. This helps maintain the sensitivity and longevity of the trigger pads.

Does the cover come in different colours?

The cover is typically produced in a smoked/clear finish. This allows the user to see the instrument while providing a professional, low-profile appearance.

How does polycarbonate compare to standard plastic covers?

Polycarbonate is significantly more durable and impact-resistant than standard plastics. It is the same material used in bulletproof glass and high-end safety equipment.

Is this cover compatible with the BAM violin or cello cases mentioned in related products?

No, this is a hardware-specific cover for the Roland SPD-SX Pro sampling pad. It is not designed to fit instrument cases like those produced by BAM.

Does the cover snap onto the unit or just sit on top?

Decksaver covers are generally precision-molded to sit securely over the unit's edges. They provide a snug fit that stays in place without the need for complex latches.

Can I play the pads with the cover still on?

No, the cover is a hard protective shell designed for when the unit is not in use. You must remove the cover to access the playing surface and triggers.

Gear article

Decksaver Roland SPD-SX Pro Cover

The Decksaver Roland SPD-SX Pro Cover is a bespoke protective shell designed specifically for the Roland SPD-SX Pro sampling pad. It is manufactured from smoked/clear polycarbonate to protect the electronic percussion instrument from liquids, dust, and physical impact while maintaining a compact profile.

See live prices

Overview

The Decksaver Roland SPD-SX Pro Cover is an essential accessory for drummers and electronic musicians utilizing Roland's flagship sampling pad. Functioning as a tough defensive shield, the cover is engineered to fit the exact contours of the device, ensuring that sensitive triggers, buttons, and the screen are shielded when the unit is not in active use. It addresses common risks in performance and studio environments, such as beverage spills, airborne dust, and accidental knocks during stage strikes.

Design and Material Properties

The cover is constructed from polycarbonate, a high-grade plastic known for its impact resistance and transparency. This material choice provides a 'robust layer' that is significantly tougher than standard acrylic. The design features a smoked-tinted transparency, allowing the user to see the device underneath while it remains protected. It is precision-trimmed to ensure that it does not interfere with the physical chassis of the SPD-SX Pro.

Operational Features

One of the primary design advantages of this cover is its 'cable-friendly' engineering. It provides sufficient clearance for necessary cables to remain plugged into the rear and side ports of the Roland SPD-SX Pro. This allows for a fast set-up and pack-down process, as the user does not need to disconnect their cabling rig to apply protection. Furthermore, its slim profile means it can remain attached to the unit when it is placed inside a secondary gig bag or flight case for transport.

Comparison to Alternative Protection

While products such as the Latin Percussion LP Cajon Bag or Gear4Music Rock Fusion Drum Bag Set provide soft-shell transport solutions, the Decksaver offers hard-shell protection that can stay on the unit while it is mounted on a stand. Unlike universal bags, it is custom-molded to the SPD-SX Pro's specific dimensions, eliminating movement within the shell. It serves a different purpose than small hardware covers like the Gibson PRTR-040 Truss Rod Cover or Fender Precision Bass Pickup Cover, as it protects the entire control interface of the instrument.

Related gear

Frequently asked questions

What material is the Decksaver for the Roland SPD-SX Pro made from?: It is manufactured using polycarbonate, a high-strength plastic that provides a robust layer of protection against impact and liquids.
Does this cover fit the original Roland SPD-SX or only the Pro model?: This specific model is engineered to fit the Roland SPD-SX Pro. Because the Pro model has different dimensions and control layouts than the original SPD-SX, it is intended specifically for the Pro version.
Can I leave my cables plugged in while using the cover?: Yes, the cover is designed with extra room to accommodate necessary cables. This allows you to quickly set up or leave the unit wired in without removing the protection.
Is the cover suitable for use during transport?: The compact design allows it to stay in place even when the unit is placed inside a gig bag or case. This provides an extra layer of structural integrity during transit.
How does this cover protect against liquids?: The polycarbonate shell acts as a barrier that deflects spills and moisture away from the pads and internal electronics. This is particularly useful in live environments where drinks may be present.
What is the typical price for this cover in the UK?: The typical price range for the Decksaver Roland SPD-SX Pro Cover is approximately £45.
Will this cover protect my device from dust?: Yes, it is designed to shield the unit from dust and debris when left set up in a studio or on stage. This helps maintain the sensitivity and longevity of the trigger pads.
Does the cover come in different colours?: The cover is typically produced in a smoked/clear finish. This allows the user to see the instrument while providing a professional, low-profile appearance.
How does polycarbonate compare to standard plastic covers?: Polycarbonate is significantly more durable and impact-resistant than standard plastics. It is the same material used in bulletproof glass and high-end safety equipment.
Is this cover compatible with the BAM violin or cello cases mentioned in related products?: No, this is a hardware-specific cover for the Roland SPD-SX Pro sampling pad. It is not designed to fit instrument cases like those produced by BAM.
Does the cover snap onto the unit or just sit on top?: Decksaver covers are generally precision-molded to sit securely over the unit's edges. They provide a snug fit that stays in place without the need for complex latches.
Can I play the pads with the cover still on?: No, the cover is a hard protective shell designed for when the unit is not in use. You must remove the cover to access the playing surface and triggers.