What material is the Decksaver Tasty Chips GR-1 Cover made from?

The cover is constructed from a high-quality polycarbonate shell. This material is chosen for its durability and high impact resistance, providing optimal protection for the synthesiser.

Does this cover fit any other synthesisers?

No, this specific model is custom-moulded specifically for the Tasty Chips GR-1. Using it with other devices is not recommended as the contours will not align with the knobs and sliders.

Can I leave my cables plugged in while using the cover?

Yes, the design provides easy access to the inputs and outputs at all times. This allows you to protect the control surface without needing to disconnect your setup.

What is the typical price for this cover?

The typical price range for the Decksaver Tasty Chips GR-1 Cover is approximately £38.00. Prices may vary slightly depending on the retailer and shipping costs.

Is the Tasty Chips GR-1 synthesiser included in the purchase?

No, the purchase only includes the polycarbonate cover. The synthesiser shown in promotional materials is for demonstration purposes only.

Does the cover protect against liquid spills?

The cover provides a significant barrier against superficial spills and dust. However, it is not an airtight seal and will not protect the device from total submersion.

What colour is the Decksaver GR-1 cover?

The cover features a high-quality smoke/clear sheen. This provides a tinted, transparent look that allows the synthesiser's design to remain visible while it is covered.

How does this cover protect the knobs and sliders?

The cover is custom-moulded to the exact shape of the GR-1. This ensures that the rigid shell sits above the controls, shielding them from external pressure and accidental impact.

Is this cover suitable for use in a flight case?

Yes, it is often used as an extra layer of protection inside flight cases or soft bags. It ensures that the synthesiser's faceplate and controls are not damaged by the case lid or other equipment.

Will the cover cause the synthesiser to overheat?

The cover is designed for use when the synthesiser is idle to prevent dust accumulation. While it can be placed on the unit while plugged in, users should ensure there is adequate ventilation if the unit generates heat during operation.

How do I clean the Decksaver cover?

The polycarbonate surface can be cleaned with a soft microfibre cloth. Avoid using abrasive cleaners or harsh chemicals that could scratch or cloud the smoke/clear finish.

Does this cover protect the bottom of the synthesiser?

No, the Decksaver is a top-mounted cover designed to protect the interface, knobs, and sliders. It does not wrap around the bottom of the chassis.

Gear article

Decksaver Tasty Chips GR-1 Cover

The Decksaver Tasty Chips GR-1 Cover is a custom-moulded protective shell designed specifically for the Tasty Chips GR-1 granular synthesiser. Constructed from durable polycarbonate, it guards against dust, liquid ingress, and accidental impact while maintaining access to rear-panel connectivity.

See live prices

Overview

The Decksaver Tasty Chips GR-1 Cover is a professional-grade protective accessory engineered to fit the unique dimensions of the Tasty Chips GR-1 granular synthesiser. Manufactured in the United Kingdom, it serves as a lightweight yet robust shield against the environmental hazards common in studio and live environments. The cover is designed to be low-profile, ensuring it does not add significant bulk to the synthesiser's footprint.

Construction and Materials

The cover is fabricated from polycarbonate, a tough, transparent thermoplastic known for its high impact resistance. This specific model features a 'smoke/clear' sheen, providing a semi-transparent aesthetic that allows the user to see the device underneath while offering a professional look. The shell is custom-moulded, following the specific contours of the GR-1's knobs, sliders, and chassis to ensure a secure, flush fit that prevents movement during transport.

Functional Features

A primary design consideration for the Decksaver GR-1 cover is its ability to protect the interface without hindering workflow. Key features include:

Precision Fit: Custom moulding ensures all sliders and knobs are shielded without being compressed.
Connectivity Access: The cover is designed to leave inputs and outputs accessible, allowing cables to remain plugged in while the unit is protected.
Environmental Guard: It provides a barrier against dust, debris, and superficial damage such as scratches or minor spills.

Applications

This cover is suited for synthesiser owners who operate in varied environments. In a home studio, it prevents dust buildup within the GR-1's fader tracks and buttons. For touring musicians, it acts as an additional layer of defence when the synthesiser is placed inside a larger padded gig bag or flight case, protecting the delicate control surface from the pressure of other equipment.

Comparison to Alternatives

Unlike universal soft cases or generic dust covers, the Decksaver model is rigid and form-fitting. While soft bags like the Latin Percussion LP Cajon Bag or Gear4music Rock Fusion Drum Bags offer general transport protection, they do not provide the structural integrity needed to prevent control-knob shear. Compared to instrument-specific cases like the BAM Conservatoire or Artisto series for violins, the Decksaver is a more minimalist solution focused specifically on surface protection rather than full enclosure.

Related gear

Frequently asked questions

What material is the Decksaver Tasty Chips GR-1 Cover made from?: The cover is constructed from a high-quality polycarbonate shell. This material is chosen for its durability and high impact resistance, providing optimal protection for the synthesiser.
Does this cover fit any other synthesisers?: No, this specific model is custom-moulded specifically for the Tasty Chips GR-1. Using it with other devices is not recommended as the contours will not align with the knobs and sliders.
Can I leave my cables plugged in while using the cover?: Yes, the design provides easy access to the inputs and outputs at all times. This allows you to protect the control surface without needing to disconnect your setup.
What is the typical price for this cover?: The typical price range for the Decksaver Tasty Chips GR-1 Cover is approximately £38.00. Prices may vary slightly depending on the retailer and shipping costs.
Is the Tasty Chips GR-1 synthesiser included in the purchase?: No, the purchase only includes the polycarbonate cover. The synthesiser shown in promotional materials is for demonstration purposes only.
Does the cover protect against liquid spills?: The cover provides a significant barrier against superficial spills and dust. However, it is not an airtight seal and will not protect the device from total submersion.
What colour is the Decksaver GR-1 cover?: The cover features a high-quality smoke/clear sheen. This provides a tinted, transparent look that allows the synthesiser's design to remain visible while it is covered.
How does this cover protect the knobs and sliders?: The cover is custom-moulded to the exact shape of the GR-1. This ensures that the rigid shell sits above the controls, shielding them from external pressure and accidental impact.
Is this cover suitable for use in a flight case?: Yes, it is often used as an extra layer of protection inside flight cases or soft bags. It ensures that the synthesiser's faceplate and controls are not damaged by the case lid or other equipment.
Will the cover cause the synthesiser to overheat?: The cover is designed for use when the synthesiser is idle to prevent dust accumulation. While it can be placed on the unit while plugged in, users should ensure there is adequate ventilation if the unit generates heat during operation.
How do I clean the Decksaver cover?: The polycarbonate surface can be cleaned with a soft microfibre cloth. Avoid using abrasive cleaners or harsh chemicals that could scratch or cloud the smoke/clear finish.
Does this cover protect the bottom of the synthesiser?: No, the Decksaver is a top-mounted cover designed to protect the interface, knobs, and sliders. It does not wrap around the bottom of the chassis.