What is the primary material used in the Decksaver P4 cover?

The cover is constructed from high-quality polycarbonate. This material is chosen for its durability and its ability to resist impacts while remaining transparent.

Does the cover fit other Zoom recorders like the P8?

No, this specific model is custom-moulded specifically for the shape of the PodTrak P4. For other devices, a different dedicated Decksaver model would be required.

Can I access the XLR inputs while the cover is on?

The design is engineered to provide easy access to inputs and outputs at all times. This allows for cable management while the device's face remains protected.

Is the Zoom PodTrak P4 included with the purchase?

No, the product is a protective accessory only. The Zoom PodTrak P4 recorder must be purchased separately.

What colour is the Decksaver cover?

The cover features a high-quality smoke/clear sheen. This provides a professional look that is tinted but still transparent enough to see the hardware beneath.

Does this cover protect against liquid spills?

Yes, the polycarbonate shell acts as a barrier against accidental liquid splashes and spills. However, it is not an airtight or waterproof seal for submersion.

How much does the Decksaver Zoom PodTrak P4 cover typically cost?

The typical price for this cover is approximately GBP 28. Prices may vary slightly depending on the specific retailer.

Is this cover suitable for travel?

Yes, it is designed for the ultimate protection during transit. It shields the delicate knobs and buttons of the P4 when placed inside a larger backpack or equipment bag.

Will this cover prevent dust from entering the device?

Yes, it is specifically designed to protect equipment from dirt and dust. It covers the main interface where dust typically settles in faders and inputs.

How does this compare to a standard gig bag?

Unlike a soft gig bag, this is a rigid shell that prevents superficial damage and pressure on the controls. It provides a more precise fit than a general-purpose bag.

Is the cover easy to remove for recording sessions?

Yes, the cover is designed to be easily placed on and lifted off the unit. It stays in place via a friction fit based on the custom moulding.

Does the cover protect the bottom of the PodTrak P4?

No, the Decksaver is a top-shell cover designed to protect the interface, knobs, and inputs. The bottom of the unit remains exposed unless placed in an additional case.

Gear article

Decksaver Zoom PodTrak P4 Cover

The Decksaver Zoom PodTrak P4 Cover is a custom-moulded protective shell designed specifically for the Zoom PodTrak P4 recorder. Manufactured from durable polycarbonate, it provides a transparent barrier against dust, liquids, and accidental impact while maintaining a low profile for transport.

See live prices

Overview

The Decksaver Zoom PodTrak P4 cover is a precision-engineered protective accessory intended for podcasters and field recorders. It is part of Decksaver's extensive range of bespoke equipment covers, designed to sit flush against the hardware. The cover is characterised by its 'smoke/clear' sheen, allowing the user to view the device's interface while it is protected.

Construction and Design

The primary material used is polycarbonate, a high-grade plastic often utilised in the manufacture of bulletproof glass. This ensures the cover is both lightweight and significantly impact-resistant. The design is custom-moulded to the exact contours of the PodTrak P4, ensuring that sensitive controls such as the gain knobs and the four XLR inputs are shielded from external pressure and debris.

Functional Features

A key design priority for this cover is accessibility. Unlike universal cases or bags, this shell is shaped to allow easy access to essential inputs and outputs. This means cables can often remain connected or be quickly re-routed without the need to remove the protection entirely during setup intervals. It protects against:

Dust and dirt ingress into the faders and jacks.
Accidental liquid spills.
Superficial scratches and scuffs during transit.

Comparison to Alternatives

When compared to general storage solutions like the Latin Percussion LP Cajon Bag or specialized instrument cases like the BAM Artisto Violin Case, the Decksaver offers a much slimmer profile. While a soft bag provides portability, it does not offer the rigid shield against crushing that a polycarbonate shell provides. It is designed to fit inside other bags or backpacks, serving as a secondary layer of hard-shell protection.

Related gear

Frequently asked questions

What is the primary material used in the Decksaver P4 cover?: The cover is constructed from high-quality polycarbonate. This material is chosen for its durability and its ability to resist impacts while remaining transparent.
Does the cover fit other Zoom recorders like the P8?: No, this specific model is custom-moulded specifically for the shape of the PodTrak P4. For other devices, a different dedicated Decksaver model would be required.
Can I access the XLR inputs while the cover is on?: The design is engineered to provide easy access to inputs and outputs at all times. This allows for cable management while the device's face remains protected.
Is the Zoom PodTrak P4 included with the purchase?: No, the product is a protective accessory only. The Zoom PodTrak P4 recorder must be purchased separately.
What colour is the Decksaver cover?: The cover features a high-quality smoke/clear sheen. This provides a professional look that is tinted but still transparent enough to see the hardware beneath.
Does this cover protect against liquid spills?: Yes, the polycarbonate shell acts as a barrier against accidental liquid splashes and spills. However, it is not an airtight or waterproof seal for submersion.
How much does the Decksaver Zoom PodTrak P4 cover typically cost?: The typical price for this cover is approximately GBP 28. Prices may vary slightly depending on the specific retailer.
Is this cover suitable for travel?: Yes, it is designed for the ultimate protection during transit. It shields the delicate knobs and buttons of the P4 when placed inside a larger backpack or equipment bag.
Will this cover prevent dust from entering the device?: Yes, it is specifically designed to protect equipment from dirt and dust. It covers the main interface where dust typically settles in faders and inputs.
How does this compare to a standard gig bag?: Unlike a soft gig bag, this is a rigid shell that prevents superficial damage and pressure on the controls. It provides a more precise fit than a general-purpose bag.
Is the cover easy to remove for recording sessions?: Yes, the cover is designed to be easily placed on and lifted off the unit. It stays in place via a friction fit based on the custom moulding.
Does the cover protect the bottom of the PodTrak P4?: No, the Decksaver is a top-shell cover designed to protect the interface, knobs, and inputs. The bottom of the unit remains exposed unless placed in an additional case.