What thread size does this wing nut fit?

The DW 8mm Thread Cymbal Wing Nut is designed specifically for 8mm threaded cymbal stands. This is the most common size for modern professional drum hardware from brands like DW, Tama, and Pearl.

Does this product come as a single unit or a pair?

This specific product is sold as a 2 Pack. This provides two complete integrated wing nut and felt assemblies in one package.

What materials are used in the construction?

The assembly consists of a metal wing nut, a high-quality felt pad, and a nylon washer. The nylon washer is integrated to prevent metal contact with the cymbal.

Will this wing nut fit DW cymbal stands?

Yes, it is designed to work with all popular DW cymbal stand models. As long as the stand features an 8mm thread, it will provide a secure fit.

How does the integrated system benefit the drummer?

The integrated design combines the nut, felt, and washer into one piece. This makes cymbal changes faster and prevents the loss of small parts during transport or setup.

Is the nylon washer replaceable?

The nylon washer is part of the integrated system designed for durability. If it becomes heavily worn, the entire integrated unit is typically replaced to maintain the protective benefits.

Can I use this with Meinl Byzance cymbals?

Yes, this wing nut is compatible with virtually any cymbal, including the Meinl Byzance 19" Extra Dry Thin Crash. The nylon washer ensures the cymbal's bell is protected.

Does it fit 6mm threaded stands?

No, this specific model is for 8mm threads only. Older vintage stands or some entry-level hardware may use 6mm threads, which are incompatible with this 8mm nut.

How does this prevent 'keyholing'?

The integrated nylon washer sits between the cymbal and the metal thread of the wing nut. This barrier prevents the metal from grinding against the cymbal's centre hole, which causes keyholing.

Can these be used on Hi-Hat stands?

These are designed for cymbal stands (crashes, rides, effects) rather than Hi-Hat clutches. While the threading might fit some Hi-Hat stems, they do not function as a replacement for a dedicated Hi-Hat clutch.

Is the felt quality suitable for professional recording?

Yes, the high-quality felt provides appropriate isolation and dampening. It allows cymbals like the UFIP Class Series or Paiste Giant Beats to resonate naturally without unwanted hardware rattle.

What is the typical price for this accessory?

The typical price range for the 2 Pack is approximately £15. This makes it an affordable upgrade for improving the reliability of a drum kit's hardware.

Gear article

DW Drums 8mm Thread Cymbal Wing Nut with Felt

The DW 8mm Thread Cymbal Wing Nut is a professional drum hardware accessory featuring an integrated wing nut and felt system. Designed for use with 8mm threaded cymbal stands, it facilitates secure cymbal placement and rapid instrument changes during performance and setup.

See live prices

Overview and Design

The DW 8mm Thread Cymbal Wing Nut is a specialised piece of drum hardware developed by DW Drums to streamline the process of mounting cymbals. The unit features an integrated design that combines a traditional contoured wing nut with a high-quality cymbal felt and a protective nylon washer. This all-in-one configuration reduces the number of loose components a drummer must manage during setup and teardown.

Constructed to fit standard 8mm threaded posts, these wing nuts are compatible with a wide array of hardware. While they are specifically designed to complement the popular DW cymbal stand ranges, their universal threading allows them to be used with various other manufacturers' 8mm stands.

Key Features and Mechanism

The primary mechanical advantage of this product is the consolidation of parts. Key features include:

Integrated Felt System: The felt is bonded or secured directly to the wing nut assembly, preventing it from falling off or being lost.
Nylon Washer: A built-in nylon washer protects the cymbal's centre hole from metal-on-metal contact, reducing the risk of 'keyholing'.
Contoured Grip: The wing nut is shaped for ergonomic use, allowing for easy tightening and loosening even with sweaty hands.
8mm Threading: The industry-standard 8mm size ensures compatibility with most modern professional-grade cymbal stands.

Performance and Character

In terms of character, this hardware is designed for reliability and efficiency rather than sonic coloration. The high-quality felt provides sufficient dampening to secure the cymbal without stifling its natural resonance. Because the felt and nut are one unit, the pressure applied to the cymbal is more consistent, allowing for precise control over the 'swing' of the cymbal. This secure placement is essential for maintaining the integrity of expensive instruments, from high-end rides like the Masterwork Iris 21 to specialized crashes such as the Istanbul Agop 19" Lenny White Epoch.

User Suitability and Comparisons

This accessory is ideally suited for touring drummers and session musicians who require quick and easy cymbal changes. The '2 Pack' configuration provides a convenient solution for upgrading multiple stands simultaneously. Compared to traditional separate wing nuts and felts, this integrated system is significantly faster to deploy. While generic wing nuts may be cheaper, they lack the integrated nylon protection and the 'stay-together' convenience of the DW design. It is compatible with a vast range of cymbals, including the Paiste Giant Beat series, Meinl Byzance, and even low-volume practice packs.

Related gear

Frequently asked questions

What thread size does this wing nut fit?: The DW 8mm Thread Cymbal Wing Nut is designed specifically for 8mm threaded cymbal stands. This is the most common size for modern professional drum hardware from brands like DW, Tama, and Pearl.
Does this product come as a single unit or a pair?: This specific product is sold as a 2 Pack. This provides two complete integrated wing nut and felt assemblies in one package.
What materials are used in the construction?: The assembly consists of a metal wing nut, a high-quality felt pad, and a nylon washer. The nylon washer is integrated to prevent metal contact with the cymbal.
Will this wing nut fit DW cymbal stands?: Yes, it is designed to work with all popular DW cymbal stand models. As long as the stand features an 8mm thread, it will provide a secure fit.
How does the integrated system benefit the drummer?: The integrated design combines the nut, felt, and washer into one piece. This makes cymbal changes faster and prevents the loss of small parts during transport or setup.
Is the nylon washer replaceable?: The nylon washer is part of the integrated system designed for durability. If it becomes heavily worn, the entire integrated unit is typically replaced to maintain the protective benefits.
Can I use this with Meinl Byzance cymbals?: Yes, this wing nut is compatible with virtually any cymbal, including the Meinl Byzance 19" Extra Dry Thin Crash. The nylon washer ensures the cymbal's bell is protected.
Does it fit 6mm threaded stands?: No, this specific model is for 8mm threads only. Older vintage stands or some entry-level hardware may use 6mm threads, which are incompatible with this 8mm nut.
How does this prevent 'keyholing'?: The integrated nylon washer sits between the cymbal and the metal thread of the wing nut. This barrier prevents the metal from grinding against the cymbal's centre hole, which causes keyholing.
Can these be used on Hi-Hat stands?: These are designed for cymbal stands (crashes, rides, effects) rather than Hi-Hat clutches. While the threading might fit some Hi-Hat stems, they do not function as a replacement for a dedicated Hi-Hat clutch.
Is the felt quality suitable for professional recording?: Yes, the high-quality felt provides appropriate isolation and dampening. It allows cymbals like the UFIP Class Series or Paiste Giant Beats to resonate naturally without unwanted hardware rattle.
What is the typical price for this accessory?: The typical price range for the 2 Pack is approximately £15. This makes it an affordable upgrade for improving the reliability of a drum kit's hardware.