What is the primary purpose of this yellow tape?

The tape is designed to identify cables that are 20 metres in length. It provides a visual colour-code that allows technicians to select the correct cable from a flight case in seconds.

Is the tape durable enough for touring?

Yes, it is designed for prolonged use on tours. It features strong adhesion and is resistant to abrasion to ensure it stays in place during heavy handling.

What colour is the tape for 20m cables?

This specific version of Eurolite Cable Marking Tape is yellow. This colour serves as the industry identifier for the 20m length within the Eurolite system.

Can I use this on different types of cables?

Yes, it is suitable for various cable types including XLR, DMX, BNC, and instrument cables. It is commonly used on 20m lighting cables like the Adam Hall 5 STAR DMX series.

Will this tape leave a sticky residue?

The tape is designed for strong adhesion during use. While designed to stay in place, common professional practice involves cleaning cables with adhesive remover if the tape is eventually replaced.

How much does the Eurolite Cable Marking Tape cost?

The typical price for a roll of this marking tape is approximately GBP 4. This makes it a cost-effective solution for large cable inventories.

Is this tape suitable for outdoor use?

The manufacturer describes it as resistant to abrasion and suitable for long tours. While it can handle standard professional environments, extreme environmental exposure should be monitored.

Where should the tape be applied on a cable?

It is most effective when applied near the connectors at both ends of the cable. This allows for quick identification without having to unroll the entire cable length.

Does this tape work on flight cases?

Yes, the manufacturer states it is perfect for both equipment storage and flight cases. It can be used to label the exterior of cases to indicate the length of cables stored inside.

How does this compare to standard electrical tape?

Eurolite Cable Marking Tape is specifically designed for the entertainment industry with higher abrasion resistance. It is intended to survive the friction and movement associated with stage work better than generic PVC tape.

Can it be used to identify 10ft or 3m cables?

While it will physically stick to any cable, the yellow colour is specifically designated for 20m lengths. Using it on 3m or 10ft cables might cause confusion during a busy set-up.

Is it compatible with Neutrik connectors?

Yes, it is frequently used to mark cables terminated with Neutrik NC3FRX or NA2MP connectors. It helps identify the length of the cable attached to these high-quality components.

Gear article

Eurolite Cable Marking Tape 20m Yellow

The Eurolite Cable Marking Tape is a specialised adhesive identification tool designed for the organisation of professional audio and lighting cabling. By utilizing a colour-coded system, it allows technicians to identify 20-metre cable lengths instantly within flight cases or storage environments.

See live prices

Overview

The Eurolite Cable Marking Tape is a functional accessory for live sound, studio, and stage lighting environments. Its primary purpose is to solve the logistical challenge of identifying cable lengths in dense storage systems. By applying this yellow tape to cables, users can verify that a specific lead is 20 metres long without having to unspool and manually measure the wire. This is particularly useful for large-scale productions where time-sensitive set-ups require rapid cable deployment.

Design and Durability

Constructed to withstand the rigours of professional touring, the tape features a high-adhesion backing that ensures it remains attached to PVC or rubber cable jackets over long durations. It is designed to be resistant to abrasion, preventing the marking from peeling or tearing when cables are pulled through trusses, stages, or heavy-duty flight cases. The vibrant yellow colour serves as a visual shorthand for the 20m specification, adhering to common industry practices for colour-coding equipment.

Application and Use Cases

While suitable for any cable requiring identification, this tape is frequently paired with long-run equipment such as the Adam Hall 5 STAR Neutrik DMX 5-Pin Lighting Cable (20m). It is equally effective for identifying power extensions or long audio looms. The tape is applied near the connectors—such as Neutrik NC3FRX right-angled XLRs or standard XLR male/female ends—to ensure the length is visible even when the cable is plugged into a patch bay or stage box.

Comparison to Alternatives

Compared to generic electrical tape, the Eurolite Marking Tape is specifically formulated for stronger adhesion and higher abrasion resistance suited for the entertainment industry. While smaller cables like 30cm or 60cm Studiospares patch leads may not require extensive marking, long-format cables (10m to 20m) benefit significantly from this system. Alternatives include heat-shrink tubing or printed labels, but tape remains the most cost-effective and flexible solution for rapid inventory management.

Related gear

Frequently asked questions

What is the primary purpose of this yellow tape?: The tape is designed to identify cables that are 20 metres in length. It provides a visual colour-code that allows technicians to select the correct cable from a flight case in seconds.
Is the tape durable enough for touring?: Yes, it is designed for prolonged use on tours. It features strong adhesion and is resistant to abrasion to ensure it stays in place during heavy handling.
What colour is the tape for 20m cables?: This specific version of Eurolite Cable Marking Tape is yellow. This colour serves as the industry identifier for the 20m length within the Eurolite system.
Can I use this on different types of cables?: Yes, it is suitable for various cable types including XLR, DMX, BNC, and instrument cables. It is commonly used on 20m lighting cables like the Adam Hall 5 STAR DMX series.
Will this tape leave a sticky residue?: The tape is designed for strong adhesion during use. While designed to stay in place, common professional practice involves cleaning cables with adhesive remover if the tape is eventually replaced.
How much does the Eurolite Cable Marking Tape cost?: The typical price for a roll of this marking tape is approximately GBP 4. This makes it a cost-effective solution for large cable inventories.
Is this tape suitable for outdoor use?: The manufacturer describes it as resistant to abrasion and suitable for long tours. While it can handle standard professional environments, extreme environmental exposure should be monitored.
Where should the tape be applied on a cable?: It is most effective when applied near the connectors at both ends of the cable. This allows for quick identification without having to unroll the entire cable length.
Does this tape work on flight cases?: Yes, the manufacturer states it is perfect for both equipment storage and flight cases. It can be used to label the exterior of cases to indicate the length of cables stored inside.
How does this compare to standard electrical tape?: Eurolite Cable Marking Tape is specifically designed for the entertainment industry with higher abrasion resistance. It is intended to survive the friction and movement associated with stage work better than generic PVC tape.
Can it be used to identify 10ft or 3m cables?: While it will physically stick to any cable, the yellow colour is specifically designated for 20m lengths. Using it on 3m or 10ft cables might cause confusion during a busy set-up.
Is it compatible with Neutrik connectors?: Yes, it is frequently used to mark cables terminated with Neutrik NC3FRX or NA2MP connectors. It helps identify the length of the cable attached to these high-quality components.