What is the maximum microphone diameter supported by the GMSUCLMP?

The clamp can accommodate microphones with a diameter of up to 42mm. This allows it to hold larger handheld units and many wireless microphone transmitters.

What is the minimum microphone diameter the clamp can hold?

The minimum supported diameter is 14mm. This makes it suitable for most slim-body pencil condenser microphones and small instrument microphones.

Does the clamp leave marks on the microphone body?

No, the clamp features EVA padding on the grip surfaces. This soft material is designed to prevent scratches and superficial damage to the microphone's finish while maintaining a firm hold.

Can this clamp be used with the Shure SM58?

Yes, the Shure SM58 is well within the 14-42mm range. The clamp provides a secure fit for both the tapered handle and the wider sections of the microphone.

Is the GMSUCLMP suitable for the Sennheiser MD 441-U?

Yes, the universal nature of the clamp allows it to grip the unique rectangular body of the MD 441-U. This is a common use case for engineers who find original clips difficult to source.

Will it hold an Electro-Voice RE20?

Yes, the 42mm maximum opening is sufficient to hold the large diameter of the Electro-Voice RE20. It serves as a budget-friendly alternative to the dedicated RE20 stand mount.

Can it hold the Shure 520DX Green Bullet?

Yes, the GMSUCLMP is capable of gripping the unusually shaped 'bullet' housing of harmonica microphones like the 520DX. Its adjustable jaws adapt to shapes that standard clips cannot.

What material is the grip padding made from?

The grip padding is made from EVA (Ethylene-vinyl acetate). This is a durable, soft foam-like material known for its shock absorption and non-marring properties.

Is this clamp compatible with wireless microphones?

Yes, most wireless handheld microphones have thicker bodies than wired versions, typically falling between 30mm and 40mm. The GMSUCLMP's 42mm capacity is ideal for these units.

What is the typical price for this clamp?

The Gravity GMSUCLMP typically retails for approximately £4.00. This makes it an affordable utility tool for both professional and amateur setups.

How does the clamp attach to a microphone stand?

The clamp features a standard threaded base that allows it to be screwed onto conventional microphone stands. It is designed to be a direct replacement for standard mic clips.

Why is this described as an 'engineers dream'?

It is described this way because it solves the common problem of having the wrong clip for a specific microphone. Its universal nature reduces the number of spare parts an engineer needs to carry.

Gear article

Gravity GMSUCLMP Universal Microphone Clamp

The Gravity GMSUCLMP is a universal microphone clamp designed to accommodate handheld microphones with diameters ranging from 14mm to 42mm. It features an adjustable spring-tensioned design and EVA padding to ensure a secure, scratch-free grip on a wide variety of microphone shapes and sizes.

See live prices

Overview

The Gravity GMSUCLMP Universal Microphone Clamp is a utility accessory designed for live sound engineers and studio technicians who require a versatile mounting solution. It replaces the need for specific, proprietary clips by offering a wide clamping range that fits almost any standard handheld microphone. The design focuses on ease of use, allowing for rapid microphone swaps during performances or recording sessions.

Design and Key Features

The primary feature of the GMSUCLMP is its adjustable jaw mechanism, which supports microphones with a diameter between 14mm and 42mm. This range encompasses everything from slim pencil condensers to thick-bodied wireless transmitters.

To protect the finish of the microphone, the interior of the clamp is lined with high-density EVA padding. This material provides two functions: it creates a non-slip surface to prevent the microphone from sliding out and acts as a soft barrier to prevent scratches or superficial damage to the microphone's chassis.

Shure SM58 Dynamic Cardioid Vocal Microphone

Compatibility

Due to its wide opening, the GMSUCLMP is compatible with industry-standard microphones including:

Shure: SM58, Beta 58A, SM57, and the 520DX Green Bullet.
Sennheiser: MD 441-U, e935, and e945.
Electro-Voice: RE20.

Its ability to hold non-cylindrical or oversized microphones makes it particularly useful for unconventional designs that typically require specialised mounting hardware.

Comparison to Alternatives

Standard microphone clips are typically fixed-size and made of hard plastic or rubber, which can be difficult to use with wireless microphones or tapered bodies. The GMSUCLMP offers a broader utility compared to fixed clips. While shock mounts provide better isolation from floor vibrations, the GMSUCLMP is preferred for its speed of use and universal fit, especially in high-pressure live environments where different microphones are used interchangeably on the same stand.

Related gear

Frequently asked questions

What is the maximum microphone diameter supported by the GMSUCLMP?: The clamp can accommodate microphones with a diameter of up to 42mm. This allows it to hold larger handheld units and many wireless microphone transmitters.
What is the minimum microphone diameter the clamp can hold?: The minimum supported diameter is 14mm. This makes it suitable for most slim-body pencil condenser microphones and small instrument microphones.
Does the clamp leave marks on the microphone body?: No, the clamp features EVA padding on the grip surfaces. This soft material is designed to prevent scratches and superficial damage to the microphone's finish while maintaining a firm hold.
Can this clamp be used with the Shure SM58?: Yes, the Shure SM58 is well within the 14-42mm range. The clamp provides a secure fit for both the tapered handle and the wider sections of the microphone.
Is the GMSUCLMP suitable for the Sennheiser MD 441-U?: Yes, the universal nature of the clamp allows it to grip the unique rectangular body of the MD 441-U. This is a common use case for engineers who find original clips difficult to source.
Will it hold an Electro-Voice RE20?: Yes, the 42mm maximum opening is sufficient to hold the large diameter of the Electro-Voice RE20. It serves as a budget-friendly alternative to the dedicated RE20 stand mount.
Can it hold the Shure 520DX Green Bullet?: Yes, the GMSUCLMP is capable of gripping the unusually shaped 'bullet' housing of harmonica microphones like the 520DX. Its adjustable jaws adapt to shapes that standard clips cannot.
What material is the grip padding made from?: The grip padding is made from EVA (Ethylene-vinyl acetate). This is a durable, soft foam-like material known for its shock absorption and non-marring properties.
Is this clamp compatible with wireless microphones?: Yes, most wireless handheld microphones have thicker bodies than wired versions, typically falling between 30mm and 40mm. The GMSUCLMP's 42mm capacity is ideal for these units.
What is the typical price for this clamp?: The Gravity GMSUCLMP typically retails for approximately £4.00. This makes it an affordable utility tool for both professional and amateur setups.
How does the clamp attach to a microphone stand?: The clamp features a standard threaded base that allows it to be screwed onto conventional microphone stands. It is designed to be a direct replacement for standard mic clips.
Why is this described as an 'engineers dream'?: It is described this way because it solves the common problem of having the wrong clip for a specific microphone. Its universal nature reduces the number of spare parts an engineer needs to carry.