What is the diameter of this tremolo bar?

The Gear4Music Guitarworks Locking Tremolo Bar has a diameter of 6mm. It is essential to check if your guitar bridge accepts this specific size before purchasing.

What finish does this tremolo bar have?

The bar features a chrome finish. This is a standard aesthetic choice that matches most traditional guitar hardware, such as chrome-plated bridges and tuners.

Is this tremolo bar compatible with all guitars?

No, it is only compatible with guitars that specifically accept a 6mm tremolo arm. It will not fit bridges designed for 5mm arms or push-in style arms that do not match these dimensions.

How much does the Gear4Music 6mm Tremolo Bar typically cost?

The typical price for this replacement part is approximately £2. This makes it an extremely affordable option for guitar maintenance and repair.

Does this product require an effects pedal to work?

No, this is a mechanical hardware part, not an electronic effect. It works by physically moving the bridge of the guitar to change the pitch of the strings.

Can I use this on a fixed-bridge guitar?

No, this arm requires a tremolo-equipped bridge (often called a 'whammy bar' bridge) to function. A fixed bridge has no mechanism to accept or utilize a tremolo arm.

Is the tip of the tremolo bar included?

The product description specifies a chrome finish for the bar. Generally, these bars are one solid piece of metal, but you should check if a plastic tip is included or if the metal is rounded at the end.

How does this compare to a Digitech Whammy Ricochet?

The Digitech Whammy Ricochet is a digital effect pedal that simulates pitch shifting electronically. The Gear4Music Tremolo Bar is a physical tool used to manually move the guitar's bridge to achieve a similar pitch-shifting effect.

Will this fit a Fender Hammertone bridge?

The Fender Hammertone series consists of effect pedals, not bridges. You would need to check the specifications of your specific guitar bridge to see if it accepts a 6mm threaded arm.

What brand manufactures this tremolo bar?

This specific 6mm locking tremolo bar is manufactured by Gear4Music under their Guitarworks accessory line.

What happens if I use a 6mm bar in a 5mm hole?

A 6mm bar will be too large to fit into a 5mm hole. Attempting to force it could damage the threading of the tremolo block or the bar itself.

Does this bar stay in place while playing?

Because it is described as a 'locking' or replacement arm for specific systems, it is designed to be threaded in securely. This prevents the bar from falling out during use, though the tightness depends on the bridge's internal mechanism.

Gear article

Gear4Music Guitarworks Locking Tremolo Bar Chrome 6mm

The Gear4Music Guitarworks Locking Tremolo Bar Chrome 6mm is a replacement hardware component designed for electric guitars equipped with tremolo systems that accept a 6mm arm diameter. It serves as a functional upgrade or repair part for instruments requiring a threaded or locking-style vibrato arm.

See live prices

Overview

The Guitarworks Locking Tremolo Bar by Gear4Music is a utility-focused guitar accessory intended for use with vibrato-equipped electric guitars. Primarily acting as a replacement part, it allows players to manipulate the pitch of their strings through the bridge assembly. The arm is constructed with a 6mm diameter, which is a common specification for many entry-level and intermediate tremolo units.

Construction and Design

This tremolo bar features a standard L-shape design, allowing for ergonomic access while playing. The chrome finish provides a classic aesthetic that matches the hardware found on many popular guitar models. Its locking nature or threaded engagement is designed to ensure the arm remains securely fastened to the bridge during use, preventing unwanted wobbling or accidental detachment during performance.

Installation and Compatibility

Compatibility is the primary consideration for this component. It is specifically designed for bridges that accommodate a 6mm arm.

Measurement: Users should verify their bridge hole diameter before purchase.
Threading: The arm is typically threaded to engage with the internal block of the tremolo system.
Fitment: Once installed, it provides the leverage required to depress or raise the bridge, changing string tension.

Target Audience

This product is best suited for guitarists who have lost or damaged their original tremolo arm and require a cost-effective replacement. Given its low price point, it is an accessible solution for hobbyists and technicians looking to restore a guitar's vibrato functionality without investing in expensive aftermarket boutique hardware.

Comparison to Alternatives

Compared to higher-end expression tools like the Yamaha FC7 or complex effects like the Digitech Whammy Ricochet, this is a purely mechanical hardware component rather than an electronic pedal. While pedals like the Fender Hammertone Flanger or Boss DD-3T manipulate sound through circuitry, the Guitarworks Tremolo Bar relies on the physical movement of the bridge to achieve pitch modulation. It is a fundamental hardware requirement for players who prefer physical vibrato over digital simulations.

Related gear

Frequently asked questions

What is the diameter of this tremolo bar?: The Gear4Music Guitarworks Locking Tremolo Bar has a diameter of 6mm. It is essential to check if your guitar bridge accepts this specific size before purchasing.
What finish does this tremolo bar have?: The bar features a chrome finish. This is a standard aesthetic choice that matches most traditional guitar hardware, such as chrome-plated bridges and tuners.
Is this tremolo bar compatible with all guitars?: No, it is only compatible with guitars that specifically accept a 6mm tremolo arm. It will not fit bridges designed for 5mm arms or push-in style arms that do not match these dimensions.
How much does the Gear4Music 6mm Tremolo Bar typically cost?: The typical price for this replacement part is approximately £2. This makes it an extremely affordable option for guitar maintenance and repair.
Does this product require an effects pedal to work?: No, this is a mechanical hardware part, not an electronic effect. It works by physically moving the bridge of the guitar to change the pitch of the strings.
Can I use this on a fixed-bridge guitar?: No, this arm requires a tremolo-equipped bridge (often called a 'whammy bar' bridge) to function. A fixed bridge has no mechanism to accept or utilize a tremolo arm.
Is the tip of the tremolo bar included?: The product description specifies a chrome finish for the bar. Generally, these bars are one solid piece of metal, but you should check if a plastic tip is included or if the metal is rounded at the end.
How does this compare to a Digitech Whammy Ricochet?: The Digitech Whammy Ricochet is a digital effect pedal that simulates pitch shifting electronically. The Gear4Music Tremolo Bar is a physical tool used to manually move the guitar's bridge to achieve a similar pitch-shifting effect.
Will this fit a Fender Hammertone bridge?: The Fender Hammertone series consists of effect pedals, not bridges. You would need to check the specifications of your specific guitar bridge to see if it accepts a 6mm threaded arm.
What brand manufactures this tremolo bar?: This specific 6mm locking tremolo bar is manufactured by Gear4Music under their Guitarworks accessory line.
What happens if I use a 6mm bar in a 5mm hole?: A 6mm bar will be too large to fit into a 5mm hole. Attempting to force it could damage the threading of the tremolo block or the bar itself.
Does this bar stay in place while playing?: Because it is described as a 'locking' or replacement arm for specific systems, it is designed to be threaded in securely. This prevents the bar from falling out during use, though the tightness depends on the bridge's internal mechanism.