What is the primary material used for the Headliner R2 Mixer Hardcase Bag?

The case is constructed from a lightweight EVA (Ethylene-vinyl acetate) shell. This material is chosen for its ability to absorb impacts while remaining rigid enough to protect the internal mixer.

Is the Headliner R2 Mixer Hardcase Bag waterproof?

The case features a water-resistant polyester outer layer. While it provides protection against light rain and moisture while you are out and about, it is not designed to be fully submersible.

Can I use this case if I have a Decksaver cover on my mixer?

Yes, the internal egg-crate foam is removable. Removing this foam creates the necessary vertical clearance to fit the Headliner R2 mixer even when a Decksaver cover is attached.

How does the case protect the rotary knobs of the mixer?

The case uses a combination of a custom-moulded base to prevent lateral movement and egg-crate foam on the lid to cushion the knobs from above. This dual approach helps prevent mechanical damage during travel.

Is there space for cables and a power supply in the bag?

The case includes a dedicated compartment specifically designed for the power supply. This ensures that the mixer and its power unit stay organised and separate to avoid scratching or damage.

What carrying options are provided with the Headliner R2 Hardcase?

The bag is equipped with a comfortable integrated handle for hand-carrying. Additionally, a shoulder strap is included for those who prefer to carry the setup over their shoulder.

Is this case compatible with mixers other than the Headliner R2?

The interior is specifically custom-moulded for the dimensions of the Headliner R2 rotary mixer. While smaller devices might fit, they will not benefit from the snug, movement-reducing fit that the custom moulding provides.

How much does the Headliner R2 Mixer Hardcase Bag typically cost?

The typical price range for this specific transport solution is approximately £75. This reflects its status as a specialized accessory for the R2 hardware.

Does the case have wheels?

No, the case is designed for portability via its handle or shoulder strap. Its lightweight EVA construction makes it easy to carry without the need for wheels.

How does the interior prevent the mixer from sliding around?

The interior features custom-moulded contours that match the shape of the R2 mixer. This snug fit acts as a physical barrier to movement, ensuring the mixer stays firmly in place regardless of the bag's orientation.

Is the internal foam permanent or removable?

The egg-crate foam in the lid is removable. This is a design feature intended to allow users to switch between using the foam for cushioning or removing it to fit a hard plastic cover like a Decksaver.

Is the shoulder strap adjustable?

The manufacturer includes a shoulder strap to allow users to carry the setup in a way that suits them best. These types of straps are generally adjustable to accommodate different heights and carrying preferences.

Gear article

Headliner R2 Mixer Hardcase Bag

The Headliner R2 Mixer Hardcase Bag is a specialized transport solution designed specifically for the Headliner R2 rotary mixer. It features a custom-moulded interior and a lightweight EVA shell to provide a balance of portability and professional protection for mobile DJs.

See live prices

Overview

The Headliner R2 Mixer Hardcase Bag is an accessory tailored for performers using the Headliner R2 rotary mixer. Recognizing the sensitive nature of rotary pots and high-fidelity internal components, this case provides a rigid but lightweight housing for transit. It is constructed from Ethylene-vinyl acetate (EVA), a polymer known for its shock-absorbent properties, which is then wrapped in a water-resistant polyester fabric to guard against the elements during transport.

Internal Configuration

The interior of the case is custom-moulded to the exact dimensions of the R2 mixer. This precise fit is designed to minimize movement, which is critical for preventing mechanical stress on the mixer's knobs and faders. A notable feature is the dedicated internal compartment for the power supply, ensuring that the mixer and its electrical components do not clash during transit.

Protection for the mixer's top panel is provided by removable egg-crate foam. This soft padding cushions the rotary controls against impact. Users who prefer to use a hard plastic Decksaver cover can easily remove this foam to accommodate the added height, allowing for a dual-layered protection strategy.

Fender Vintage Precision Bass Pickup Cover Chrome

Ergonomics and Portability

Designed for the 'on the move' DJ, the bag focuses on ease of carry. Despite its rigid structure, the use of EVA materials keeps the overall weight low. It features two primary carrying options:

A reinforced top handle for brief manual transport.
An included shoulder strap for longer commutes or when hands-free carrying is required.

The water-resistant exterior further enhances its utility for professional DJs navigating various environments between venues.

Market Position and Comparison

At a typical price point of £75, the Headliner R2 Hardcase sits in a specialized niche compared to general-purpose gear bags like the Latin Percussion LP Cajon Bag or universal drum bag sets by Gear4music. Unlike soft-shell bags, the Headliner's moulded EVA shell offers significantly more structural integrity against compression. While brands like BAM produce ultra-high-end hardshell cases for orchestral instruments, Headliner focuses on the specific form factor and lifestyle requirements of the electronic music performer.

Related gear

Frequently asked questions

What is the primary material used for the Headliner R2 Mixer Hardcase Bag?: The case is constructed from a lightweight EVA (Ethylene-vinyl acetate) shell. This material is chosen for its ability to absorb impacts while remaining rigid enough to protect the internal mixer.
Is the Headliner R2 Mixer Hardcase Bag waterproof?: The case features a water-resistant polyester outer layer. While it provides protection against light rain and moisture while you are out and about, it is not designed to be fully submersible.
Can I use this case if I have a Decksaver cover on my mixer?: Yes, the internal egg-crate foam is removable. Removing this foam creates the necessary vertical clearance to fit the Headliner R2 mixer even when a Decksaver cover is attached.
How does the case protect the rotary knobs of the mixer?: The case uses a combination of a custom-moulded base to prevent lateral movement and egg-crate foam on the lid to cushion the knobs from above. This dual approach helps prevent mechanical damage during travel.
Is there space for cables and a power supply in the bag?: The case includes a dedicated compartment specifically designed for the power supply. This ensures that the mixer and its power unit stay organised and separate to avoid scratching or damage.
What carrying options are provided with the Headliner R2 Hardcase?: The bag is equipped with a comfortable integrated handle for hand-carrying. Additionally, a shoulder strap is included for those who prefer to carry the setup over their shoulder.
Is this case compatible with mixers other than the Headliner R2?: The interior is specifically custom-moulded for the dimensions of the Headliner R2 rotary mixer. While smaller devices might fit, they will not benefit from the snug, movement-reducing fit that the custom moulding provides.
How much does the Headliner R2 Mixer Hardcase Bag typically cost?: The typical price range for this specific transport solution is approximately £75. This reflects its status as a specialized accessory for the R2 hardware.
Does the case have wheels?: No, the case is designed for portability via its handle or shoulder strap. Its lightweight EVA construction makes it easy to carry without the need for wheels.
How does the interior prevent the mixer from sliding around?: The interior features custom-moulded contours that match the shape of the R2 mixer. This snug fit acts as a physical barrier to movement, ensuring the mixer stays firmly in place regardless of the bag's orientation.
Is the internal foam permanent or removable?: The egg-crate foam in the lid is removable. This is a design feature intended to allow users to switch between using the foam for cushioning or removing it to fit a hard plastic cover like a Decksaver.
Is the shoulder strap adjustable?: The manufacturer includes a shoulder strap to allow users to carry the setup in a way that suits them best. These types of straps are generally adjustable to accommodate different heights and carrying preferences.