What is the primary purpose of the K&M 25993?

It is designed as a compact, low-profile stand for miking instruments situated close to the ground, such as kick drums, cajons, and guitar amplifiers. Its flat base allows for placement in tight spaces where tripod stands cannot fit.

How does the K&M 25993 handle floor vibrations?

The stand is equipped with four elastic rubber feet. These are specifically designed to minimise impact sound and prevent unwanted transmission noise from reaching the microphone.

Can the microphone position be adjusted on this stand?

Yes, the K&M 25993 features an adjustable boom arm. This allows the user to precisely angle and extend the microphone toward the sound source once the base is positioned.

Is the base of the K&M 25993 a tripod or a flat plate?

It features a flat and stable base plate. This design is chosen specifically to allow the stand to slide under or into hard-to-reach areas where tripod legs would be too bulky.

What instruments is this stand best suited for?

It is ideal for kick drums, guitar cabinets, and cajons. It can also be used for any other floor-level sound source that requires stable, low-profile miking.

What is the typical price for the K&M 25993?

The stand typically retails for approximately £56.00. Prices may vary slightly depending on the retailer and shipping costs.

How does this stand compare to a standard Trojan Pro mic stand?

While the Trojan Pro Mic Stand is a versatile telescopic boom stand for general use, the K&M 25993 is a specialised low-profile stand. The 25993 is much shorter and uses a flat base instead of a tripod for specific close-to-ground applications.

Is the K&M 25993 suitable for vocalists?

Generally no, as it is a compact low-profile stand designed for floor-level instruments. A full-height stand, such as those often bundled with a Shure SM58, would be required for standing vocalists.

Why would I choose a flat base over a tripod base?

A flat base is more space-efficient and can be tucked into corners or under drum hardware more easily than a tripod. It provides a lower centre of gravity for better stability when miking heavy instruments at floor level.

Is this stand compatible with tablet mounts?

While K&M makes products like the 19797 Tablet PC Table Stand, the 25993 is specifically a microphone stand. Most standard tablet holders with a 3/8" or 5/8" thread could theoretically be attached, but its height is optimised for floor use.

Does the stand require assembly?

Typically, the stand comes mostly assembled, requiring only the attachment of the boom arm and the microphone clip (sold separately). The setup is designed to be quick and intuitive for studio or stage use.

What brand manufactures this stand?

The stand is manufactured by K&M (König & Meyer), a brand well-known for producing professional-grade music accessories, including speaker stands like the 214/6 and various instrument pegs.

Gear article

K&M 25993 Compact Microphone Stand

The K&M 25993 is a low-profile, space-saving microphone stand designed specifically for miking guitar cabinets, kick drums, and cajons. Featuring a flat base and an adjustable boom arm, it is engineered to fit into confined spaces where traditional tripod stands are impractical.

See live prices

Overview

The K&M 25993 is a specialised compact microphone stand developed by the German manufacturer König & Meyer. It is primarily designed to facilitate microphone placement in scenarios where vertical space or floor area is limited. Unlike standard vocal stands, the 25993 utilizes a low-profile design that allows it to be positioned extremely close to the sound source, such as the bottom head of a drum or the speaker baffle of a guitar amplifier.

Design and Key Features

The stand is characterised by its flat, stable base which provides a significant advantage over tripod-style stands in tight environments. The flat plate design allows the stand to slide under equipment or into hard-to-reach places without the legs creating an obstruction.

To ensure precise microphone placement, the unit features an adjustable boom arm. Furthermore, the stand is equipped with four elastic rubber feet. These components are critical for acoustic isolation, as they serve to minimise impact sound and unwanted transmission noise from the floor, which is a common issue with low-profile stands placed near vibration-heavy instruments like kick drums.

Applications

The K&M 25993 is most commonly used in recording studios and live sound reinforcement for the following tasks: * Kick Drums: Positioning a microphone inside or just outside the port hole of a bass drum. * Guitar Cabinets: Mic placement directly in front of speaker grilles, especially in crowded stage setups. * Cajons: Capturing the low-end resonance of the instrument at floor level. * Small Enclosures: Any scenario where a full-sized stand would be too bulky or prone to tipping.

Market Comparison

When compared to generic alternatives like the Trojan Pro Mic Stand with Telescopic Boom, the K&M 25993 is more specialised for low-level work. While full-height stands offer more versatility for vocals, they often lack the stability at low heights that the 25993's flat base provides. In the broader ecosystem of instrument support, K&M also produces related gear such as the 214/6 Speaker Stand and the 19797 Tablet PC Table Stand, maintaining a consistent focus on build quality and stability across their product range.

Related gear

Frequently asked questions

What is the primary purpose of the K&M 25993?: It is designed as a compact, low-profile stand for miking instruments situated close to the ground, such as kick drums, cajons, and guitar amplifiers. Its flat base allows for placement in tight spaces where tripod stands cannot fit.
How does the K&M 25993 handle floor vibrations?: The stand is equipped with four elastic rubber feet. These are specifically designed to minimise impact sound and prevent unwanted transmission noise from reaching the microphone.
Can the microphone position be adjusted on this stand?: Yes, the K&M 25993 features an adjustable boom arm. This allows the user to precisely angle and extend the microphone toward the sound source once the base is positioned.
Is the base of the K&M 25993 a tripod or a flat plate?: It features a flat and stable base plate. This design is chosen specifically to allow the stand to slide under or into hard-to-reach areas where tripod legs would be too bulky.
What instruments is this stand best suited for?: It is ideal for kick drums, guitar cabinets, and cajons. It can also be used for any other floor-level sound source that requires stable, low-profile miking.
What is the typical price for the K&M 25993?: The stand typically retails for approximately £56.00. Prices may vary slightly depending on the retailer and shipping costs.
How does this stand compare to a standard Trojan Pro mic stand?: While the Trojan Pro Mic Stand is a versatile telescopic boom stand for general use, the K&M 25993 is a specialised low-profile stand. The 25993 is much shorter and uses a flat base instead of a tripod for specific close-to-ground applications.
Is the K&M 25993 suitable for vocalists?: Generally no, as it is a compact low-profile stand designed for floor-level instruments. A full-height stand, such as those often bundled with a Shure SM58, would be required for standing vocalists.
Why would I choose a flat base over a tripod base?: A flat base is more space-efficient and can be tucked into corners or under drum hardware more easily than a tripod. It provides a lower centre of gravity for better stability when miking heavy instruments at floor level.
Is this stand compatible with tablet mounts?: While K&M makes products like the 19797 Tablet PC Table Stand, the 25993 is specifically a microphone stand. Most standard tablet holders with a 3/8" or 5/8" thread could theoretically be attached, but its height is optimised for floor use.
Does the stand require assembly?: Typically, the stand comes mostly assembled, requiring only the attachment of the boom arm and the microphone clip (sold separately). The setup is designed to be quick and intuitive for studio or stage use.
What brand manufactures this stand?: The stand is manufactured by K&M (König & Meyer), a brand well-known for producing professional-grade music accessories, including speaker stands like the 214/6 and various instrument pegs.