What amplifiers are compatible with the Marshall PEDL-90012?

This footswitch is designed for use with the Marshall DSL series. Specifically, it works with the DSL5, DSL20C, DSL20H, DSL40, and DSL100 models.

What does the first button on the PEDL-90012 control?

The first button is used to switch between the amplifier's gain channels. It allows the player to toggle between the Classic Gain and Ultra Gain settings.

What does the second button on the PEDL-90012 control?

The second button controls the amplifier's FX loop. It enables the user to remotely engage or disengage all effects units connected through the amp's loop.

Is the Marshall PEDL-90012 a latching or momentary footswitch?

The PEDL-90012 is a latching footswitch. This means the switch stays in its new state after being pressed until it is pressed again.

Does the PEDL-90012 have status lights?

Yes, the unit features bright LED indicators. These lights show whether the FX loop or the Ultra Gain channel is currently active.

Can I use the PEDL-90012 in dark environments?

Yes, the footswitch is designed for stage use. The bright LEDs are specifically included to help the player see the status of their settings on a dark stage.

Is the construction of the PEDL-90012 durable?

The manufacturer describes it as having a sturdy construction. It is built to be a reliable tool for touring and regular live performance.

What is the typical price for a Marshall PEDL-90012?

The typical price range for this footswitch is approximately EUR 49. Prices may vary slightly depending on the retailer and region.

Do I need a separate power supply for the LEDs?

No, the footswitch typically draws the necessary power to operate the LEDs directly from the amplifier via the connecting cable. No external battery or power brick is required.

Will this footswitch work with a Fender Jazzmaster or Stratocaster?

No, this is an amplifier controller, not a guitar part. While products like Fender Stratocaster Knobs or Jazzmaster Pickup Covers are for guitars, this is strictly for Marshall DSL amplifiers.

Can I use this footswitch to switch between more than two channels?

The PEDL-90012 is a 2-way switch. It is limited to toggling between two gain modes and the FX loop status as defined by the amp's architecture.

Is the cable included with the PEDL-90012?

The footswitch usually comes with the required cable to connect to the 'Footswitch' jack on the back of your Marshall DSL amplifier. This cable transmits both the switching signal and the power for the LEDs.

Gear article

Marshall PEDL-90012 2-Way Latching Footswitch

The Marshall PEDL-90012 is a professional-grade 2-way latching footswitch designed specifically for the Marshall DSL series of amplifiers. It provides remote switching capabilities for channel selection and FX loop activation, featuring integrated LED indicators for stage visibility.

See live prices

Overview

The Marshall PEDL-90012 is an essential accessory for guitarists using modern Marshall DSL amplifiers. As a dedicated 2-way latching footswitch, it serves as the primary interface for hands-free amplifier control during live performance or studio sessions. The unit is constructed with a focus on durability to withstand the rigours of regular stage use, ensuring that the amplifier's full tonal range is accessible at the user's feet.

Design and Functionality

The PEDL-90012 features two heavy-duty footswitches that allow the player to toggle between the 'Classic Gain' and 'Ultra Gain' channels of a compatible amplifier. Additionally, it provides a dedicated switch for the FX loop, enabling the player to bypass or engage all effects connected to the amp's rear panel loop simultaneously.

A key functional benefit of this model is the inclusion of bright LED indicators. These lights provide immediate visual feedback, allowing the performer to identify if the FX loop or the Ultra Gain channel is active even under challenging, low-light stage conditions.

Compatibility

The PEDL-90012 is specifically engineered for the current Marshall DSL range. It is compatible with the following models:

Marshall DSL5
Marshall DSL20C
Marshall DSL20H
Marshall DSL40
Marshall DSL100

Because it uses a specific latching mechanism and wiring configuration, it is primarily intended for these Marshall amplifiers to ensure full functionality of both the channel and FX loop features.

Market Context

Positioned within the 'Parts & spares' category with a typical price point of approximately EUR 49, the PEDL-90012 is a mid-range accessory. While third-party generic footswitches exist, the PEDL-90012 is the official manufacturer-approved solution for the DSL series. It differs from other guitar accessories such as the Gotoh 203B-4 Bass Bridge or Fender American Standard Stratocaster Tremolo Bridge Assemblies, which are structural hardware, by being an electronic control interface.

Related gear

Frequently asked questions

What amplifiers are compatible with the Marshall PEDL-90012?: This footswitch is designed for use with the Marshall DSL series. Specifically, it works with the DSL5, DSL20C, DSL20H, DSL40, and DSL100 models.
What does the first button on the PEDL-90012 control?: The first button is used to switch between the amplifier's gain channels. It allows the player to toggle between the Classic Gain and Ultra Gain settings.
What does the second button on the PEDL-90012 control?: The second button controls the amplifier's FX loop. It enables the user to remotely engage or disengage all effects units connected through the amp's loop.
Is the Marshall PEDL-90012 a latching or momentary footswitch?: The PEDL-90012 is a latching footswitch. This means the switch stays in its new state after being pressed until it is pressed again.
Does the PEDL-90012 have status lights?: Yes, the unit features bright LED indicators. These lights show whether the FX loop or the Ultra Gain channel is currently active.
Can I use the PEDL-90012 in dark environments?: Yes, the footswitch is designed for stage use. The bright LEDs are specifically included to help the player see the status of their settings on a dark stage.
Is the construction of the PEDL-90012 durable?: The manufacturer describes it as having a sturdy construction. It is built to be a reliable tool for touring and regular live performance.
What is the typical price for a Marshall PEDL-90012?: The typical price range for this footswitch is approximately EUR 49. Prices may vary slightly depending on the retailer and region.
Do I need a separate power supply for the LEDs?: No, the footswitch typically draws the necessary power to operate the LEDs directly from the amplifier via the connecting cable. No external battery or power brick is required.
Will this footswitch work with a Fender Jazzmaster or Stratocaster?: No, this is an amplifier controller, not a guitar part. While products like Fender Stratocaster Knobs or Jazzmaster Pickup Covers are for guitars, this is strictly for Marshall DSL amplifiers.
Can I use this footswitch to switch between more than two channels?: The PEDL-90012 is a 2-way switch. It is limited to toggling between two gain modes and the FX loop status as defined by the amp's architecture.
Is the cable included with the PEDL-90012?: The footswitch usually comes with the required cable to connect to the 'Footswitch' jack on the back of your Marshall DSL amplifier. This cable transmits both the switching signal and the power for the LEDs.