How many pedals can this cable power?

The Mooer daisy chain cable is designed to connect and provide power for up to ten individual effects pedals simultaneously.

What voltage is this cable compatible with?

This cable is designed for use with standard 9-volt power supplies, which is the most common voltage for guitar effects pedals.

Does this cable include a wall power adapter?

No, the Mooer 10 Straight Plug is a distribution cable only; it must be connected to a separate 9V power supply to function.

Are the plugs straight or right-angled?

The cable features straight plug connectors, which are useful for reaching power jacks in specific or tight orientations on a pedalboard.

Is this a cost-effective way to power a pedalboard?

Yes, with a typical price range of approximately £6, it is significantly cheaper than purchasing an expensive multi-output isolated power supply.

Can I use this for digital pedals?

While it can connect to digital pedals, users should check that the total current draw of all pedals does not exceed the single power adapter's capacity.

What is the primary benefit for live performers?

The main benefit is faster setup and pack-down times, as all pedals can remain connected to the same power distribution rail at all times.

Can I power more than ten pedals with one cable?

This specific model is limited to ten output plugs. Attempting to modify it or add more may exceed the safe limits of your power supply.

Who is the manufacturer of this cable?

The cable is manufactured by Mooer Audio, a company well-known for producing compact guitar effects and accessories.

Does this cable provide isolated power?

No, this is a daisy chain cable, meaning all connected pedals share a common ground. For complete isolation, a dedicated multi-output power brick is required.

What happens if I have fewer than ten pedals?

The cable will function perfectly with fewer than ten pedals; simply leave the unused plugs disconnected, ensuring they do not touch conductive surfaces.

Is the cable compatible with non-Mooer pedals?

Yes, as long as the pedals use standard 9V DC power with a compatible barrel jack, this cable can be used regardless of the pedal brand.

Gear article

Mooer 10 Straight Plug Pedal Daisy Chain Cable

The Mooer 10 Straight Plug Pedal Daisy Chain Cable is a power distribution accessory designed to provide electricity to up to ten effects pedals from a single 9-volt power source. Produced by Mooer Audio, it serves as a cost-effective alternative to dedicated multi-output power supplies for musicians managing small-to-medium pedalboard configurations.

See live prices

Overview

The Mooer 10 Straight Plug Pedal Daisy Chain Cable is a utility cable designed to simplify the powering of guitar effects pedals. By utilising a parallel wiring scheme, the cable allows a single 9-volt AC adapter to distribute power across ten individual straight-plug connectors. This design eliminates the need for multiple individual power adapters or bulky, expensive isolated power supply units for players with high pedal counts but lower power requirements.

Practical Application

The primary function of the cable is to streamline setup and pack-down times for live performers and studio musicians. When integrated into a pedalboard, the daisy chain allows all ten pedals to remain permanently connected to a single power rail. In scenarios where a player unexpectedly runs out of power outlets or realizes they only have one wall adapter for an entire board, the cable provides an immediate solution for connecting the entire signal chain to a single source.

Design and Connectivity

The cable features ten straight DC plugs spaced along a single length of insulated wire. These plugs are compatible with standard 2.1mm barrel jacks found on the majority of 9-volt effects pedals. Unlike right-angled connectors found on some competing patch cables, these straight plugs are designed for easy insertion into pedals where the power jack may be recessed or positioned in tight proximity to other inputs.

Comparison and Suitability

Compared to professional isolated power supplies, the Mooer daisy chain is significantly more affordable, typically retailing around £6. It is most suitable for players using analogue pedals with low current draw, such as overdrives, boosts, and compressors. While it offers high convenience, users should ensure the total current draw (measured in milliamperes) of all ten pedals does not exceed the maximum output rating of the single 9V adapter being used.

Related gear

Frequently asked questions

How many pedals can this cable power?: The Mooer daisy chain cable is designed to connect and provide power for up to ten individual effects pedals simultaneously.
What voltage is this cable compatible with?: This cable is designed for use with standard 9-volt power supplies, which is the most common voltage for guitar effects pedals.
Does this cable include a wall power adapter?: No, the Mooer 10 Straight Plug is a distribution cable only; it must be connected to a separate 9V power supply to function.
Are the plugs straight or right-angled?: The cable features straight plug connectors, which are useful for reaching power jacks in specific or tight orientations on a pedalboard.
Is this a cost-effective way to power a pedalboard?: Yes, with a typical price range of approximately £6, it is significantly cheaper than purchasing an expensive multi-output isolated power supply.
Can I use this for digital pedals?: While it can connect to digital pedals, users should check that the total current draw of all pedals does not exceed the single power adapter's capacity.
What is the primary benefit for live performers?: The main benefit is faster setup and pack-down times, as all pedals can remain connected to the same power distribution rail at all times.
Can I power more than ten pedals with one cable?: This specific model is limited to ten output plugs. Attempting to modify it or add more may exceed the safe limits of your power supply.
Who is the manufacturer of this cable?: The cable is manufactured by Mooer Audio, a company well-known for producing compact guitar effects and accessories.
Does this cable provide isolated power?: No, this is a daisy chain cable, meaning all connected pedals share a common ground. For complete isolation, a dedicated multi-output power brick is required.
What happens if I have fewer than ten pedals?: The cable will function perfectly with fewer than ten pedals; simply leave the unused plugs disconnected, ensuring they do not touch conductive surfaces.
Is the cable compatible with non-Mooer pedals?: Yes, as long as the pedals use standard 9V DC power with a compatible barrel jack, this cable can be used regardless of the pedal brand.