What is included in the PDP 8mm Wing Nut with Felt 2pk?

The package contains two 8mm threaded wing nuts and two corresponding cymbal felts. This provides enough hardware to fully secure two separate cymbal stands or tilters.

What thread size do these wing nuts fit?

These wing nuts are designed exclusively for 8mm threads. This is the modern industry standard for most medium-to-heavy-duty cymbal stands.

Will these fit vintage cymbal stands?

Many vintage stands utilize a thinner 6mm thread. You should measure your stand's tilter thread before purchasing, as these 8mm nuts will be too large for 6mm posts.

Why is it important to use felts with wing nuts?

Felts prevent the metal wing nut from rubbing directly against the metal of the cymbal. Without them, the cymbal hole can wear away into an irregular shape known as keyholing.

Can these be used on brands other than PDP?

Yes, as long as the stand has an 8mm thread, these wing nuts will fit. They are universal across brands that utilize the 8mm hardware standard.

How many cymbals can I secure with one pack?

One pack can secure two cymbals, as it contains two nuts and two felts. Note that most stands require a bottom felt as well, which is not included in this top-securing kit.

Are these wing nuts made of metal?

Yes, the wing nuts are constructed from metal to ensure durability and a secure grip on the threaded post. The felts are made of compressed fibers designed for cushioning.

What is the typical price for this 2-pack?

The typical retail price for the PDP 8mm Wing Nut with Felt 2pk is approximately £10.00. Prices may vary slightly depending on the retailer.

Do I need tools to install these?

No tools are required. The 'wing' design is specifically intended to be tightened and loosened by hand for quick setup and tear-down.

What happens if I over-tighten the wing nut?

Over-tightening can choke the cymbal's sound and prevent it from vibrating naturally. It can also put unnecessary stress on the cymbal's center hole and the felt itself.

Are the felts thick enough for heavy crashing?

The included felts are of a standard thickness suitable for most drumming applications. They provide enough clearance to protect the cymbal even under heavy impact.

How often should I replace my cymbal felts?

Felts should be replaced when they become compressed, thin, or brittle. Replacing them ensures continued protection for your cymbals and maintains the desired sustain.

Gear article

PDP 8mm Wing Nut with Felt 2pk

The PDP 8mm Wing Nut with Felt 2pk is a replacement hardware set designed to secure cymbals on standard drum stands. Comprising two wing nuts and two felts, the set is compatible with 8mm threads, providing essential protection against metal-on-metal contact and ensuring cymbal stability during performance.

See live prices

Overview

The PDP 8mm Wing Nut with Felt 2pk serves as a fundamental maintenance accessory for drummers using industry-standard hardware. Manufactured by Pacific Drums and Percussion, a subsidiary of Drum Workshop (DW), these components are designed to fit 8mm threaded cymbal tilters, which is the most common size found on modern professional and intermediate drum stands. The pack provides a convenient solution for replacing lost or worn hardware, ensuring that cymbals remain safely mounted.

Functionality and Protection

The primary function of this hardware set is to prevent 'keyholing' and other forms of cymbal damage caused by metal-on-metal contact. The included felts act as a buffer between the cymbal and the wing nut, allowing the cymbal to vibrate freely while staying seated on the stand. By tightening the wing nut, the drummer can control the amount of movement or 'swing' the cymbal has, providing a customisable feel for different playing styles.

Fender Jazzmaster Pickup Covers Aged White

Compatibility and Design

These wing nuts are specifically engineered for 8mm threads. While 6mm threads were common on vintage hardware, the 8mm standard is now the baseline for most contemporary manufacturers including PDP, DW, and many others. The wing nuts feature a standard ergonomic design that allows for easy manual tightening and loosening without the need for additional tools. The felts are of a standard density to provide a balance between durability and vibration absorption.

User Suitability

This product is suitable for any drummer utilizing 8mm cymbal stands who requires reliable replacement parts. Because wing nuts and felts are frequently lost during transport or worn down through repetitive use, keeping a spare pack is considered a practical necessity for gigging musicians. It is also an appropriate purchase for drummers looking to refresh used hardware that may have arrived without adequate cymbal protection.

Related gear

Frequently asked questions

What is included in the PDP 8mm Wing Nut with Felt 2pk?: The package contains two 8mm threaded wing nuts and two corresponding cymbal felts. This provides enough hardware to fully secure two separate cymbal stands or tilters.
What thread size do these wing nuts fit?: These wing nuts are designed exclusively for 8mm threads. This is the modern industry standard for most medium-to-heavy-duty cymbal stands.
Will these fit vintage cymbal stands?: Many vintage stands utilize a thinner 6mm thread. You should measure your stand's tilter thread before purchasing, as these 8mm nuts will be too large for 6mm posts.
Why is it important to use felts with wing nuts?: Felts prevent the metal wing nut from rubbing directly against the metal of the cymbal. Without them, the cymbal hole can wear away into an irregular shape known as keyholing.
Can these be used on brands other than PDP?: Yes, as long as the stand has an 8mm thread, these wing nuts will fit. They are universal across brands that utilize the 8mm hardware standard.
How many cymbals can I secure with one pack?: One pack can secure two cymbals, as it contains two nuts and two felts. Note that most stands require a bottom felt as well, which is not included in this top-securing kit.
Are these wing nuts made of metal?: Yes, the wing nuts are constructed from metal to ensure durability and a secure grip on the threaded post. The felts are made of compressed fibers designed for cushioning.
What is the typical price for this 2-pack?: The typical retail price for the PDP 8mm Wing Nut with Felt 2pk is approximately £10.00. Prices may vary slightly depending on the retailer.
Do I need tools to install these?: No tools are required. The 'wing' design is specifically intended to be tightened and loosened by hand for quick setup and tear-down.
What happens if I over-tighten the wing nut?: Over-tightening can choke the cymbal's sound and prevent it from vibrating naturally. It can also put unnecessary stress on the cymbal's center hole and the felt itself.
Are the felts thick enough for heavy crashing?: The included felts are of a standard thickness suitable for most drumming applications. They provide enough clearance to protect the cymbal even under heavy impact.
How often should I replace my cymbal felts?: Felts should be replaced when they become compressed, thin, or brittle. Replacing them ensures continued protection for your cymbals and maintains the desired sustain.