What is included in the RockBoard Handle Set package?

The package contains two ergonomically shaped handles, the necessary mounting screws, and the tools required for installation. This ensures you have everything needed to attach them to a compatible board immediately.

Which pedalboard models are compatible with these handles?

The handles are designed specifically for the Warwick RockBoard DUO, TRES, QUAD, and CINQUE series. They align with the mounting holes provided on these specific frames.

What material are the handles made from?

The handles are constructed from durable powder-coated steel. This material was chosen to provide strength and a professional aesthetic that matches the pedalboard frames.

Do the handles offer any protection for my pedals?

Yes, by protruding slightly above the height of the pedals, the handles can act as a guard. They provide an additional layer of protection against side impacts or pressure during transport.

Is the installation process difficult?

No, installation is designed to be quick and straightforward. The handles attach directly to the existing slots in the RockBoard frame using the provided mounting hardware.

Will these handles fit a Palmer Pedalbay 60?

These handles are specifically designed for the RockBoard mounting system. While they may appear similar to other rail-based boards like the Palmer Pedalbay, they are not guaranteed to fit without modification.

Are these handles ergonomic?

Yes, the handles are ergonomically shaped. This design is intended to provide a comfortable and secure grip when lifting heavy boards out of their cases.

Do I need to drill holes into my pedalboard to install them?

No drilling is required for compatible RockBoard models. They are designed to screw directly into the existing mounting points on the sides of the board.

What is the typical price for the set?

The Warwick RockBoard Pedalboard Handle Set typically retails for approximately £20.00. Prices may vary slightly depending on the retailer.

Can these handles be used with a RockBoard QUAD 4.3?

Yes, the QUAD series, including the 4.3 model, is fully compatible with this handle set. It is highly recommended for larger boards like the QUAD 4.3 to improve handling.

Will the handles fit inside my RockBoard Gig Bag?

Yes, the handles are designed with the dimensions of RockBoard gig bags and flight cases in mind. They should fit within the standard clearance of the official cases.

How many handles come in one set?

The set includes two handles. This allows you to place one on each side of the pedalboard for balanced two-handed lifting.

Gear article

Warwick RockBoard Pedalboard Handle Set

The Warwick RockBoard Pedalboard Handle Set is a pair of ergonomically shaped, powder-coated steel handles designed to facilitate the transport of RockBoard pedalboards. These handles attach directly to the board's frame to provide a secure grip when lifting equipment from gig bags or flight cases.

See live prices

Background and Design

The RockBoard Pedalboard Handle Set was developed by Warwick as a modular upgrade for their existing line of pedalboards. Recognising that fully loaded pedalboards can be difficult to extract from tight-fitting flight cases or gig bags, the handles were designed to offer a dedicated lifting point. They feature an ergonomic shape intended to provide a secure grip during transit.

Constructed from heavy-duty steel, the handles are finished with a professional black powder coating. This finish is chosen for its durability and resistance to the typical wear and tear associated with touring and frequent rehearsals.

Functionality and Installation

The handle set is designed for straightforward installation without the need for additional drilling on compatible RockBoard models. The handles attach directly to the side slots of the pedalboard frame using the included mounting hardware.

Key functional benefits include: * Enhanced Mobility: Easier extraction from protective cases. * Pedal Protection: The height and positioning of the handles provide a physical barrier that can help shield pedal knobs and switches from accidental impact during transport. * Structural Integrity: The use of steel ensures the handles can support the weight of a fully populated board without bending.

Compatibility

The set is specifically engineered for the RockBoard series by Warwick. It is compatible with the following ranges: * DUO Series (e.g., DUO 2.1) * TRES Series * QUAD Series (e.g., QUAD 4.1 and 4.3) * CINQUE Series

Because they utilize the specific mounting tracks found on these boards, they may not be natively compatible with other brands such as Palmer or Gator without modification.

Target Audience

This accessory is primarily aimed at gigging musicians and touring professionals who use RockBoard systems. It is particularly useful for those using larger boards like the QUAD 4.3 or CINQUE models, where the weight of multiple pedals, power supplies, and cabling makes a traditional two-handed lift difficult. It also suits users who frequently transition between gig bags and flight cases, where the clearance for fingers to grip the board is often minimal.

Comparison to Alternatives

Compared to integrated solutions like the Boss BCB-1000, which features a suitcase-style handle and wheels, the RockBoard Handle Set is a modular add-on for open-frame boards. While products like the G4M Pedalboard or Sennheiser XS Wireless Digital Pedalboard Receiver focus on electronics, this set addresses the physical ergonomics of the rig.

Unlike standard cabinet handles found at hardware stores, these are purpose-built to fit the mounting holes of the RockBoard grid, ensuring a flush and stable fit without compromising the structural warranty of the pedalboard.

Related gear

Frequently asked questions

What is included in the RockBoard Handle Set package?: The package contains two ergonomically shaped handles, the necessary mounting screws, and the tools required for installation. This ensures you have everything needed to attach them to a compatible board immediately.
Which pedalboard models are compatible with these handles?: The handles are designed specifically for the Warwick RockBoard DUO, TRES, QUAD, and CINQUE series. They align with the mounting holes provided on these specific frames.
What material are the handles made from?: The handles are constructed from durable powder-coated steel. This material was chosen to provide strength and a professional aesthetic that matches the pedalboard frames.
Do the handles offer any protection for my pedals?: Yes, by protruding slightly above the height of the pedals, the handles can act as a guard. They provide an additional layer of protection against side impacts or pressure during transport.
Is the installation process difficult?: No, installation is designed to be quick and straightforward. The handles attach directly to the existing slots in the RockBoard frame using the provided mounting hardware.
Will these handles fit a Palmer Pedalbay 60?: These handles are specifically designed for the RockBoard mounting system. While they may appear similar to other rail-based boards like the Palmer Pedalbay, they are not guaranteed to fit without modification.
Are these handles ergonomic?: Yes, the handles are ergonomically shaped. This design is intended to provide a comfortable and secure grip when lifting heavy boards out of their cases.
Do I need to drill holes into my pedalboard to install them?: No drilling is required for compatible RockBoard models. They are designed to screw directly into the existing mounting points on the sides of the board.
What is the typical price for the set?: The Warwick RockBoard Pedalboard Handle Set typically retails for approximately £20.00. Prices may vary slightly depending on the retailer.
Can these handles be used with a RockBoard QUAD 4.3?: Yes, the QUAD series, including the 4.3 model, is fully compatible with this handle set. It is highly recommended for larger boards like the QUAD 4.3 to improve handling.
Will the handles fit inside my RockBoard Gig Bag?: Yes, the handles are designed with the dimensions of RockBoard gig bags and flight cases in mind. They should fit within the standard clearance of the official cases.
How many handles come in one set?: The set includes two handles. This allows you to place one on each side of the pedalboard for balanced two-handed lifting.