What is the primary function of this cable?

The primary function is to extend the length of a standard 3.5mm (1/8 inch) headphone or stereo cable by 7.5 metres.

Can I use this cable with non-Roland headphones?

Yes, it is a standard stereo extension cable compatible with any headphones featuring a 3.5mm minijack connector.

Is this cable mono or stereo?

This is a stereo TRS (Tip-Ring-Sleeve) cable, designed to carry two channels of audio for a full stereo image.

How long is the cable in feet?

The cable is approximately 25 feet long, which translates to 7.5 metres.

Can this be used as a general TRS extender?

Yes, it can be used to extend any 1/8" TRS cable, not just those used for headphones.

Does the length of 7.5m cause any signal loss?

While all long cables have some resistance, Roland designs these with high-quality shielding and conductors to minimise audible signal degradation at this length.

What connectors does the cable have?

It features a male 3.5mm (1/8") TRS plug on one end and a female 3.5mm (1/8") TRS socket on the other.

Is the cable suitable for professional studio use?

Yes, it is marketed as a high-quality extension suitable for both professional studio monitoring and home use.

Can I use this for an electric guitar?

No, electric guitars typically use 1/4" TS mono cables. This cable is 1/8" TRS and will not fit standard guitar jacks without adapters.

Is the cable jacket durable?

Yes, Roland cables are built with flexible, professional-grade jackets designed to withstand regular studio and stage use.

Will this work with a smartphone?

It will work with smartphones that have a 3.5mm headphone jack. However, it may not support microphone/remote functions found on 4-pole TRRS cables.

What is the typical price for this cable?

The typical price for this Roland extension cable is approximately £20.00.

Gear article

Roland 1/8" Headphone Minijack Extension Cable (7.5m)

The Roland Headphone Minijack Extension Cable is a high-quality stereo audio lead designed to extend the reach of standard 3.5mm (1/8") TRS connections. Measuring 7.5 metres (25 feet) in length, it is specifically engineered for use with Roland headphones and other professional audio monitoring equipment.

See live prices

Overview

The Roland 1/8" Headphone Minijack Extension Cable serves as a reliable bridge for audio monitoring in environments where the source device and the listener are separated by a significant distance. At 7.5 metres, it offers substantial mobility for performers, studio engineers, and domestic users who require more slack than standard integrated headphone cables provide.

While primarily marketed for Roland's own range of monitoring headphones, the cable is a universal accessory compatible with any device utilising a standard 3.5mm stereo jack. Its construction is designed to maintain signal integrity over its long run, ensuring that the stereo image and frequency response remain consistent.

Key Features and Connectivity

The cable features a male 1/8" (3.5mm) TRS connector on one end and a female 1/8" (3.5mm) TRS socket on the other. This configuration allows it to function as a direct extender for headphones or as a general-purpose extender for other TRS-based cables.

Key physical characteristics include: * Heavy-duty shielding: Designed to reject electromagnetic interference during long signal runs. * Flexible jacket: A durable outer casing that allows for easy coiling and storage without tangling. * Reinforced connectors: Moulded strain relief at the connection points to prevent internal wire breakage during frequent use.

Applications

This cable is most commonly utilised in recording studios, where a musician may need to stand several metres away from an audio interface or headphone amplifier. It is also suitable for electronic drummers or keyboardists who require freedom of movement around their instrument rig while monitoring their performance. In domestic settings, it facilitates the connection of headphones to home entertainment systems located across a room.

Comparison and Alternatives

Within the professional audio market, this Roland cable competes with various other specialised interconnects. While short patch leads like the Studiospares Standard XLR 30cm or the Studiospares XLR 60cm are designed for close-proximity rack wiring, this Roland extension is purpose-built for distance.

Unlike instrument-specific cables such as the Ernie Ball P06049 10ft White Straight-Angle cable, which carries mono signals from a guitar to an amp, the Roland extension is a stereo (TRS) lead. Users requiring different adaptations might consider the Neutrik NA2MP Male XLR to 1/4" Jack Adaptor for converting signals, or Gear4Music Essentials Dual Jack to RCA leads for connecting to hi-fi equipment.

Related gear

Frequently asked questions

What is the primary function of this cable?: The primary function is to extend the length of a standard 3.5mm (1/8 inch) headphone or stereo cable by 7.5 metres.
Can I use this cable with non-Roland headphones?: Yes, it is a standard stereo extension cable compatible with any headphones featuring a 3.5mm minijack connector.
Is this cable mono or stereo?: This is a stereo TRS (Tip-Ring-Sleeve) cable, designed to carry two channels of audio for a full stereo image.
How long is the cable in feet?: The cable is approximately 25 feet long, which translates to 7.5 metres.
Can this be used as a general TRS extender?: Yes, it can be used to extend any 1/8" TRS cable, not just those used for headphones.
Does the length of 7.5m cause any signal loss?: While all long cables have some resistance, Roland designs these with high-quality shielding and conductors to minimise audible signal degradation at this length.
What connectors does the cable have?: It features a male 3.5mm (1/8") TRS plug on one end and a female 3.5mm (1/8") TRS socket on the other.
Is the cable suitable for professional studio use?: Yes, it is marketed as a high-quality extension suitable for both professional studio monitoring and home use.
Can I use this for an electric guitar?: No, electric guitars typically use 1/4" TS mono cables. This cable is 1/8" TRS and will not fit standard guitar jacks without adapters.
Is the cable jacket durable?: Yes, Roland cables are built with flexible, professional-grade jackets designed to withstand regular studio and stage use.
Will this work with a smartphone?: It will work with smartphones that have a 3.5mm headphone jack. However, it may not support microphone/remote functions found on 4-pole TRRS cables.
What is the typical price for this cable?: The typical price for this Roland extension cable is approximately £20.00.