What is the total length of this cable?

The cable is supplied on a single reel containing 25 metres of continuous wire.

Can I use this cable for my electric guitar?

No, this is a speaker cable designed for high-current signals. Using it as an instrument cable for a guitar will result in significant interference and noise.

Does this cable come with connectors attached?

No, it is supplied as a raw cable on a reel. You will need to purchase and install your own connectors, such as jack plugs or Speakon connectors.

Is this cable suitable for outdoor PA systems?

While suitable for PA systems, it is recommended for use in dry environments or within protective conduit if used in a permanent outdoor installation.

Can I cut this cable into multiple smaller lengths?

Yes, the reel format is specifically designed so you can cut exactly the length you need for multiple different connections.

Is this cable compatible with Neutrik connectors?

Yes, it is compatible with standard professional connectors such as the Neutrik NC3FRX or various 1/4 inch jack adapters.

What is the price of the Gear4music 25m Speaker Cable?

The typical price for this 25-metre reel is approximately £25.

Can this be used for home cinema installations?

Yes, the 25-metre length makes it an excellent choice for wiring surround sound speakers in a home theatre setup.

Is the cable shielded?

This is a professional speaker cable; speaker cables are typically unshielded to minimize capacitance, as the high-level signal is less susceptible to interference than line-level signals.

What gauge is the wire inside?

The manufacturer describes it as professional quality suitable for PA systems, implying a gauge capable of handling standard power amplifier outputs.

How does this differ from an XLR cable?

An XLR cable, like the Studiospares Standard, is typically used for balanced mic or line-level signals, whereas this cable is built to carry the much higher voltage required to move speaker drivers.

Is this cable flexible enough for touring?

Yes, the cable is designed to be professional quality, offering the flexibility required for both fixed installations and mobile PA applications.

Gear article

Gear4music 25m Speaker Cable

The Gear4music 25m Speaker Cable is a professional-grade bulk wiring solution designed for high-power audio transmissions between amplifiers and loudspeakers. Supplied on a 25-metre reel, it is primarily intended for permanent installations, PA system setups, and custom-length cabling requirements.

See live prices

Overview

The Gear4music 25m Speaker Cable is an essential utility component for audio engineers and venue installers. Unlike pre-terminated patch cables, this product provides a continuous 25-metre length of professional-quality wire on a convenient reel. This format allows users to cut specific lengths tailored to their unique spatial requirements, reducing cable clutter and signal degradation caused by excessive slack.

The cable is engineered to facilitate the high-voltage signal transfer required to drive passive speakers from power amplifiers. Its construction focuses on durability and electrical efficiency, ensuring it can withstand the rigours of both mobile PA use and static architectural installations.

Applications

This cable is highly versatile, catering to several distinct audio environments:

PA Systems: Connecting large-scale front-of-house speakers to central power amplifiers.
Amplifier Cabinets: Ideal for wiring head-and-cab configurations in guitar or bass rigs where standard lengths are insufficient.
Fixed Installations: Running audio lines through walls or ceilings in studios, bars, or performance venues.
Custom Cabling: Providing a bulk source for technicians who prefer to solder their own specialized connectors, such as Speakon or 1/4 inch jacks.

Performance and Character

As a passive component, the Gear4music speaker cable is designed for transparency. Its primary function is to maintain signal integrity over its 25-metre span without introducing significant resistance or capacitive loss. The professional-quality shielding and conductor gauge are selected to handle the output of high-wattage amplifiers without overheating or causing audible distortion, ensuring the speaker reproduces the amplifier's output accurately.

Comparison to Alternatives

When compared to instrument cables, such as the Ernie Ball P06049 10ft or the Gear4music Essentials Dual Jack to RCA, this speaker cable is distinguished by its ability to carry high-current signals. While instrument cables are shielded for low-level signals, this product is unshielded or differently shielded to prevent the melting of insulation under high-power loads. Unlike shorter patch leads like the Studiospares 30cm XLR, the 25m reel format offers significantly more flexibility for large-stage coverage, though it requires manual termination compared to 'plug-and-play' options like the Adam Hall 5-Pin DMX cable.

Related gear

Frequently asked questions

What is the total length of this cable?: The cable is supplied on a single reel containing 25 metres of continuous wire.
Can I use this cable for my electric guitar?: No, this is a speaker cable designed for high-current signals. Using it as an instrument cable for a guitar will result in significant interference and noise.
Does this cable come with connectors attached?: No, it is supplied as a raw cable on a reel. You will need to purchase and install your own connectors, such as jack plugs or Speakon connectors.
Is this cable suitable for outdoor PA systems?: While suitable for PA systems, it is recommended for use in dry environments or within protective conduit if used in a permanent outdoor installation.
Can I cut this cable into multiple smaller lengths?: Yes, the reel format is specifically designed so you can cut exactly the length you need for multiple different connections.
Is this cable compatible with Neutrik connectors?: Yes, it is compatible with standard professional connectors such as the Neutrik NC3FRX or various 1/4 inch jack adapters.
What is the price of the Gear4music 25m Speaker Cable?: The typical price for this 25-metre reel is approximately £25.
Can this be used for home cinema installations?: Yes, the 25-metre length makes it an excellent choice for wiring surround sound speakers in a home theatre setup.
Is the cable shielded?: This is a professional speaker cable; speaker cables are typically unshielded to minimize capacitance, as the high-level signal is less susceptible to interference than line-level signals.
What gauge is the wire inside?: The manufacturer describes it as professional quality suitable for PA systems, implying a gauge capable of handling standard power amplifier outputs.
How does this differ from an XLR cable?: An XLR cable, like the Studiospares Standard, is typically used for balanced mic or line-level signals, whereas this cable is built to carry the much higher voltage required to move speaker drivers.
Is this cable flexible enough for touring?: Yes, the cable is designed to be professional quality, offering the flexibility required for both fixed installations and mobile PA applications.