What is the primary function of this cable?

The primary function is to split a single stereo 1/4-inch signal into two separate mono 1/4-inch signals. It is commonly used for connecting stereo equipment to two channels on a mixing desk or for mixer insert points.

How long is the Gear4Music Stereo Jack - Mono Jack cable?

The cable is three metres in length. This provides sufficient distance for connecting instruments to mixers or interfaces in typical home or professional studio environments.

What types of connectors are used on this cable?

It features one 1/4-inch (6.35mm) TRS stereo jack at one end and two 1/4-inch (6.35mm) TS mono jacks at the other end. These are standard sizes for professional audio equipment.

Can this cable be used as a mixer 'Insert' cable?

Yes, this is one of its primary uses. The stereo end plugs into the mixer's TRS insert jack, while the mono ends connect to the input and output of an external processor like a compressor or EQ.

Is this cable suitable for connecting a guitar to an amplifier?

While it could technically pass a signal, it is not intended for standard guitar-to-amp connections. A dedicated mono instrument cable, such as an Ernie Ball P06049, is better suited for that purpose.

What is the typical price for this Gear4Music cable?

This cable typically retails for approximately £5.00. It is designed to be a budget-friendly yet high-quality solution for audio connectivity.

Does this cable work with RCA phono connections?

No, this cable uses 1/4-inch jack connectors exclusively. For RCA connections, a product like the Gear4Music Essentials Dual Jack to RCA Phono Cable would be required.

Can I use this to connect a smartphone to a mixer?

Most smartphones use a 3.5mm mini-jack rather than the 1/4-inch stereo jack found on this cable. You would need a 3.5mm to 1/4-inch adapter to use this cable with a smartphone.

Is the cable balanced or unbalanced?

The signal path is unbalanced. The stereo TRS end carries two discrete signals (left and right) which are then split into two unbalanced mono TS connectors.

How does this compare to a Neutrik connector cable?

Neutrik connectors, such as the NC3FRX, are often found on premium or custom cables and offer higher mechanical durability. This Gear4Music cable is a more affordable, all-in-one alternative for general use.

Can this cable be used for BNC antenna connections?

No, it cannot. BNC connections, like those found on the LD Systems WS100BNC10, use a completely different physical locking mechanism and coaxial cable type for radio frequencies.

Is this cable suitable for DMX lighting control?

No, this is an audio cable. DMX lighting requires specific 5-pin or 3-pin cables with different impedance ratings, such as the Adam Hall 5 STAR Neutrik DMX cable.

Gear article

Gear4Music Stereo Jack - Mono Jack (x2) Cable 3m

The Gear4Music Stereo Jack - Mono Jack (x2) Cable is a three-metre audio utility lead designed to split a single stereo signal into two discrete mono channels. Utilising standard 1/4-inch (6.35mm) connectors, it serves as a high-quality interface between professional audio equipment, instruments, and mixing consoles.

See live prices

Overview

The Gear4Music Stereo Jack - Mono Jack (x2) Cable is a fundamental piece of studio and live audio hardware. It belongs to the broader category of 'breakout' or 'insert' cables, facilitating the connection between equipment with differing output and input configurations. At a total length of three metres, the cable provides sufficient reach for most small-to-medium studio setups, allowing for the flexible positioning of hardware.

Technical Features

The cable features a single 1/4-inch stereo (TRS) jack at one end, which splits into two 1/4-inch mono (TS) jacks at the other. This configuration is essential for routing a combined stereo signal into two separate mixer channels or for utilizing 'Insert' points on analogue mixing desks. The construction is designed for durability and signal integrity, typical of Gear4Music's range of audio interconnects.

Studiospares Standard XLR (M) - XLR (F) Cable 60cm

Common Applications

This specific cable is frequently employed in the following scenarios:

Connecting the headphone output of a digital piano or synthesizer to two mono inputs on a mixer.
Acting as an 'Insert' cable to route audio from a mixer channel to an external effects processor and back again.
Splitting a stereo output from a computer audio interface into separate left and right channels for monitoring.
Interfacing consumer audio devices with professional sound reinforcement systems.

Market Context

Positioned at a highly accessible price point of approximately £5, this cable competes with other utility cables such as the Gear4Music Essentials Dual Jack to RCA Phono Cable or various offerings from Studiospares. While premium connectors like those from Neutrik offer specialized features (such as the NC3FRX right-angled connector), the Gear4Music 3m cable provides a cost-effective solution for standard studio connectivity without requiring additional adaptors like the Neutrik NA2MP.

Related gear

Frequently asked questions

What is the primary function of this cable?: The primary function is to split a single stereo 1/4-inch signal into two separate mono 1/4-inch signals. It is commonly used for connecting stereo equipment to two channels on a mixing desk or for mixer insert points.
How long is the Gear4Music Stereo Jack - Mono Jack cable?: The cable is three metres in length. This provides sufficient distance for connecting instruments to mixers or interfaces in typical home or professional studio environments.
What types of connectors are used on this cable?: It features one 1/4-inch (6.35mm) TRS stereo jack at one end and two 1/4-inch (6.35mm) TS mono jacks at the other end. These are standard sizes for professional audio equipment.
Can this cable be used as a mixer 'Insert' cable?: Yes, this is one of its primary uses. The stereo end plugs into the mixer's TRS insert jack, while the mono ends connect to the input and output of an external processor like a compressor or EQ.
Is this cable suitable for connecting a guitar to an amplifier?: While it could technically pass a signal, it is not intended for standard guitar-to-amp connections. A dedicated mono instrument cable, such as an Ernie Ball P06049, is better suited for that purpose.
What is the typical price for this Gear4Music cable?: This cable typically retails for approximately £5.00. It is designed to be a budget-friendly yet high-quality solution for audio connectivity.
Does this cable work with RCA phono connections?: No, this cable uses 1/4-inch jack connectors exclusively. For RCA connections, a product like the Gear4Music Essentials Dual Jack to RCA Phono Cable would be required.
Can I use this to connect a smartphone to a mixer?: Most smartphones use a 3.5mm mini-jack rather than the 1/4-inch stereo jack found on this cable. You would need a 3.5mm to 1/4-inch adapter to use this cable with a smartphone.
Is the cable balanced or unbalanced?: The signal path is unbalanced. The stereo TRS end carries two discrete signals (left and right) which are then split into two unbalanced mono TS connectors.
How does this compare to a Neutrik connector cable?: Neutrik connectors, such as the NC3FRX, are often found on premium or custom cables and offer higher mechanical durability. This Gear4Music cable is a more affordable, all-in-one alternative for general use.
Can this cable be used for BNC antenna connections?: No, it cannot. BNC connections, like those found on the LD Systems WS100BNC10, use a completely different physical locking mechanism and coaxial cable type for radio frequencies.
Is this cable suitable for DMX lighting control?: No, this is an audio cable. DMX lighting requires specific 5-pin or 3-pin cables with different impedance ratings, such as the Adam Hall 5 STAR Neutrik DMX cable.