What is the primary function of this loom?

The primary function is to route eight separate analogue audio signals through a single D-Sub connector to eight TRS jacks, reducing cable clutter and simplifying setup.

Is this cable suitable for digital signals like AES/EBU?

No, this specific loom is designed for analogue signal management. While DB-25 connectors are used for digital audio, the wiring and impedance of this loom are optimised for analogue signals.

How long is the cable?

The cable has a fixed length of 2 metres, providing sufficient reach for standard rack-to-desk or interface-to-patch-bay connections.

What connectors are used on the fan-out end?

The fan-out end features eight 6.35mm (1/4 inch) TRS (Tip-Ring-Sleeve) male jacks, which are used for balanced analogue audio.

Where is this product manufactured?

This Studiospares loom is hand-crafted in the United Kingdom to ensure high build quality and reliability for professional use.

Can this be used with a mixing console?

Yes, it is designed to route signals from instruments or outboard gear directly to a mixing console or audio interface that supports DB-25 or TRS inputs.

Is the signal path balanced or unbalanced?

The signal path is balanced, utilizing TRS jacks and a 25-pin D-Sub connector to ensure noise-free signal transmission over the 2-metre length.

Does this loom help with cable management?

Yes, by merging eight individual cables into a single tidy assembly, it streamlines connections and reduces the risk of tangling or damage.

What is the gender of the D-Sub connector?

The loom features a male 25-pin D-Sub connector, which typically plugs into the female DB-25 ports found on audio interfaces and consoles.

Is this loom suitable for live performance?

Yes, it is built for durability and efficient stage management, allowing for quick setups and reliable signal routing in live environments.

Who is the intended user for this product?

It is designed for musicians, audio engineers, and content creators who require efficient, professional-standard audio routing solutions.

How does this compare to using eight individual TRS cables?

This loom is more efficient and organised than eight separate cables, as it uses a single consolidated connector on one end, preventing clutter and simplifying the identification of channels.

Gear article

Studiospares 25-Pin D-Sub to 8 x 6.35mm TRS Analogue Loom

The Studiospares 25-Pin D-Sub (M) to 8 x 6.35mm TRS (M) Analogue Loom is a 2-metre multichannel audio cable designed for high-density signal routing in professional recording and live environments. Hand-crafted in the United Kingdom, it enables the consolidated transmission of eight balanced audio signals through a single DB-25 connector.

Studiospares 25 Pin D Sub (M) - 8 x 6.35mm TRS (M) Analogue Loom 2m

See live prices

Overview

The Studiospares 25-Pin D-Sub to 8 x 6.35mm TRS Analogue Loom is a professional-grade cabling solution intended to streamline signal management. By merging eight individual balanced lines into a single cable assembly, it significantly reduces clutter behind racks, desks, and mixing consoles. This loom is specifically designed for analogue signal paths, facilitating connections between high-density equipment such as multi-channel audio interfaces, patch bays, and summing mixers.

Construction and Design

Constructed with a focus on durability and signal integrity, this loom is hand-crafted in the UK. One end features a standard 25-pin D-Sub (DB-25) male connector, while the fan-out end consists of eight 6.35mm (1/4 inch) TRS jacks. The balanced nature of the TRS connectors ensures that the loom is capable of noise-free performance over its 2-metre length, making it suitable for sensitive recording environments where electromagnetic interference must be minimised.

Studiospares Standard XLR (M) - XLR (F) Cable 60cm

Applications

In the studio, this loom is typically used to connect the line inputs or outputs of an audio interface to a patch bay or a series of outboard processors. In live performance settings, it serves as a robust tool for stage management, allowing engineers to quickly set up multi-channel connections without the risk of tangling individual cables. This efficiency is critical for reducing setup times and protecting the physical integrity of the signal path during transport and installation.

Comparison and Market Context

Within the Studiospares range, this loom sits alongside standard interconnects like the XLR (M) to XLR (F) patch cables. Compared to consumer-level alternatives like the Gear4Music Dual Jack to RCA cable, the Studiospares DB-25 loom is a specialist tool for professional-standard balanced audio. While generic instrument cables, such as those from Ernie Ball, provide single-channel connectivity, this loom provides an integrated eight-channel solution for complex audio routing.

Related gear

Frequently asked questions

What is the primary function of this loom?: The primary function is to route eight separate analogue audio signals through a single D-Sub connector to eight TRS jacks, reducing cable clutter and simplifying setup.
Is this cable suitable for digital signals like AES/EBU?: No, this specific loom is designed for analogue signal management. While DB-25 connectors are used for digital audio, the wiring and impedance of this loom are optimised for analogue signals.
How long is the cable?: The cable has a fixed length of 2 metres, providing sufficient reach for standard rack-to-desk or interface-to-patch-bay connections.
What connectors are used on the fan-out end?: The fan-out end features eight 6.35mm (1/4 inch) TRS (Tip-Ring-Sleeve) male jacks, which are used for balanced analogue audio.
Where is this product manufactured?: This Studiospares loom is hand-crafted in the United Kingdom to ensure high build quality and reliability for professional use.
Can this be used with a mixing console?: Yes, it is designed to route signals from instruments or outboard gear directly to a mixing console or audio interface that supports DB-25 or TRS inputs.
Is the signal path balanced or unbalanced?: The signal path is balanced, utilizing TRS jacks and a 25-pin D-Sub connector to ensure noise-free signal transmission over the 2-metre length.
Does this loom help with cable management?: Yes, by merging eight individual cables into a single tidy assembly, it streamlines connections and reduces the risk of tangling or damage.
What is the gender of the D-Sub connector?: The loom features a male 25-pin D-Sub connector, which typically plugs into the female DB-25 ports found on audio interfaces and consoles.
Is this loom suitable for live performance?: Yes, it is built for durability and efficient stage management, allowing for quick setups and reliable signal routing in live environments.
Who is the intended user for this product?: It is designed for musicians, audio engineers, and content creators who require efficient, professional-standard audio routing solutions.
How does this compare to using eight individual TRS cables?: This loom is more efficient and organised than eight separate cables, as it uses a single consolidated connector on one end, preventing clutter and simplifying the identification of channels.