What is the primary use of this cable?

The cable is designed for connecting audio equipment such as mixers, studio monitors, and interfaces. It is suitable for both professional studio recording and live sound reinforcement.

Is this a balanced or unbalanced cable?

This is a TRS (Tip-Ring-Sleeve) cable, which means it can carry balanced mono signals or unbalanced stereo signals depending on the connected equipment.

What material is used for the cable conductors?

The cable uses low-loss oxygen-free copper (OFC). This material is chosen for its high conductivity and ability to deliver clear, accurate audio transmission.

How does the cable handle interference?

The Precision Pro connectors feature diecast aluminium housings. This design helps shield the signal from interference caused by mobile phones and RF signals.

What is the length of this specific model?

This specific Studiospares TRS cable is 5 metres (approximately 16.4 feet) long. This provides a balance between reach and signal integrity.

What type of connectors does it use?

It uses 6.35mm (1/4 inch) Precision Pro TRS jack connectors. These are designed for professional durability and secure fitment.

Does the cable include any strain relief?

Yes, it features a chuck-style grip. This mechanism keeps the cable securely connected to the plug even during frequent movement.

Is a cable management solution included?

Yes, each cable comes with a free cable tidy. This allows for easier storage and helps prevent the lead from tangling when not in use.

Can this cable be used for an electric guitar?

While it will fit a guitar, electric guitars typically use TS (unbalanced) cables. This TRS cable is more commonly used for line-level balanced connections.

How does this compare to an XLR cable?

Both can carry balanced signals. However, this cable uses 6.35mm jacks, whereas cables like the Studiospares Standard XLR use 3-pin connectors typical for microphones.

Are the connectors plastic or metal?

The connectors use diecast aluminium housings. This provides much higher durability and better shielding than plastic alternatives.

What is the typical price for this cable?

This cable typically retails in the range of £10. This makes it a cost-effective solution for professional-grade audio cabling.

Gear article

Studiospares 6.35mm (M) TRS Cable 5m

The Studiospares 6.35mm (M) TRS Cable 5m is a professional-grade balanced audio lead designed for high-fidelity signal transmission in recording and live sound environments. Featuring Precision Pro connectors and oxygen-free copper construction, it is engineered to provide reliable connectivity and interference-free performance.

See live prices

Overview

The Studiospares 6.35mm TRS Cable is a 5-metre audio lead specifically developed for musicians, audio engineers, and event professionals. As a TRS (Tip-Ring-Sleeve) cable, it is capable of carrying balanced mono signals or unbalanced stereo signals, making it a versatile component in modern audio signal chains. The cable is designed to bridge the gap between affordable utility and high-end professional performance, adhering to the standard requirements of studio and stage applications.

Design and Construction

The cable is built using low-loss oxygen-free copper (OFC), which is essential for maintaining signal integrity over a 5-metre distance. This material choice minimises resistance and ensures accurate audio transmission. The connectors are Studiospares' own Precision Pro models, which feature diecast aluminium housings. These metal housings serve a dual purpose: they provide physical durability and act as a shield against electromagnetic interference (EMI) and radio frequency interference (RFI), such as signals emitted by mobile phones.

Studiospares Standard XLR (M) - XLR (F) Cable 60cm

Mechanical Features

To withstand the rigours of frequent use, the cable incorporates a chuck-style internal grip. This mechanism secures the cable jacket within the connector housing, preventing the internal solder joints from being stressed when the cable is pulled or moved. This makes it particularly suitable for 'active' environments like live stages where equipment may be repositioned often. Additionally, the product includes a free cable tidy to assist with cable management and prevent tangling during storage.

Audio Performance

The character of the Studiospares TRS cable is defined by its transparency and low noise floor. By utilising a balanced architecture (when used with compatible balanced equipment), it effectively cancels out induced noise over its length. The low-loss copper core ensures that high frequencies remain intact, providing the professional-grade clarity required for critical listening and recording tasks.

Applications and Compatibility

This 5-metre lead is ideal for connecting studio monitors, audio interfaces, mixers, and outboard signal processors. It is an appropriate alternative to shorter patch cables, such as the Studiospares Standard 60cm XLR, when longer runs are required across a room. While similar in appearance to standard instrument cables, such as the Ernie Ball P06049, the TRS configuration allows for balanced operation which a standard TS instrument cable cannot provide.

Related gear

Frequently asked questions

What is the primary use of this cable?: The cable is designed for connecting audio equipment such as mixers, studio monitors, and interfaces. It is suitable for both professional studio recording and live sound reinforcement.
Is this a balanced or unbalanced cable?: This is a TRS (Tip-Ring-Sleeve) cable, which means it can carry balanced mono signals or unbalanced stereo signals depending on the connected equipment.
What material is used for the cable conductors?: The cable uses low-loss oxygen-free copper (OFC). This material is chosen for its high conductivity and ability to deliver clear, accurate audio transmission.
How does the cable handle interference?: The Precision Pro connectors feature diecast aluminium housings. This design helps shield the signal from interference caused by mobile phones and RF signals.
What is the length of this specific model?: This specific Studiospares TRS cable is 5 metres (approximately 16.4 feet) long. This provides a balance between reach and signal integrity.
What type of connectors does it use?: It uses 6.35mm (1/4 inch) Precision Pro TRS jack connectors. These are designed for professional durability and secure fitment.
Does the cable include any strain relief?: Yes, it features a chuck-style grip. This mechanism keeps the cable securely connected to the plug even during frequent movement.
Is a cable management solution included?: Yes, each cable comes with a free cable tidy. This allows for easier storage and helps prevent the lead from tangling when not in use.
Can this cable be used for an electric guitar?: While it will fit a guitar, electric guitars typically use TS (unbalanced) cables. This TRS cable is more commonly used for line-level balanced connections.
How does this compare to an XLR cable?: Both can carry balanced signals. However, this cable uses 6.35mm jacks, whereas cables like the Studiospares Standard XLR use 3-pin connectors typical for microphones.
Are the connectors plastic or metal?: The connectors use diecast aluminium housings. This provides much higher durability and better shielding than plastic alternatives.
What is the typical price for this cable?: This cable typically retails in the range of £10. This makes it a cost-effective solution for professional-grade audio cabling.