What is the primary function of this cable?

The cable is designed to connect a 6.35mm (1/4 inch) TRS jack output to dual RCA phono inputs. This is commonly used to send audio from professional audio gear to consumer amplifiers or speakers.

How long is the cable?

This specific Pro model is 3 metres in length, providing sufficient reach for most home studio and stage setups.

What does 'low-capacitance' mean for audio quality?

Low capacitance prevents the loss of high-frequency detail in the audio signal. This ensures a full frequency response and maintains the dynamic range of the original source.

Is this cable suitable for live stage use?

Yes, it is precision-engineered for both stage and studio applications. Its construction is designed to resist noise and interference often found in live environments.

What is the difference between this and the 'Essentials' version?

The Pro version features higher quality engineering designed for better signal purity and lower noise. It is intended for users who require a more robust and sonically accurate connection.

Can this cable be used with a guitar?

While it has a 6.35mm jack, it is not a standard instrument cable. It is designed for line-level signals going from a TRS output to RCA inputs, rather than connecting a guitar to an amplifier.

Does this cable provide shielding against interference?

Yes, it is specifically designed to provide a pure signal without the risk of noise and interference. This is achieved through its precision-engineered internal structure.

What connectors are used on this cable?

It features a single 6.35mm (1/4") TRS Jack at one end and two RCA Phono connectors at the other end. All connectors are designed for professional reliability.

Is the TRS jack balanced?

The 6.35mm connector is a TRS (Tip-Ring-Sleeve) type. However, when split into two RCA phono connectors (which are unbalanced), the signal path becomes unbalanced stereo.

How much does this cable typically cost?

The typical price for the Gear4Music TRS 6.35mm to RCA Pro 3m cable is approximately £6.00. Prices may vary slightly depending on the retailer and current promotions.

Will this cable affect the dynamic range of my audio?

No, the cable is designed to provide a full dynamic range. Its high-quality construction is intended to replicate every nuance of the original source without compression or loss.

Can I use this to connect my audio interface to my home stereo?

Yes, this is a common use case. If your interface has a TRS output, this cable will allow you to send that signal to the RCA inputs of a hi-fi or home cinema receiver.

Gear article

Gear4Music TRS 6.35mm Jack to RCA Phono Pro Cable 3m

The Gear4Music TRS 6.35mm Jack to Dual RCA Phono Pro Cable is a three-metre high-quality interconnect designed for stage and studio applications. Engineered to ensure signal purity, the cable features a low-capacitance design to maintain full frequency response and dynamic range.

See live prices

Overview

The Gear4Music TRS 6.35mm Jack to Dual RCA Phono Pro Cable is a precision-engineered audio solution targeted at both live performance and recording environments. At a length of three metres, it serves as a versatile bridge between balanced or stereo 6.35mm outputs and equipment utilizing RCA inputs. The 'Pro' designation indicates a construction focused on durability and signal integrity compared to standard entry-level variants.

Technical Specifications and Design

Central to the performance of this cable is its low-capacitance architecture. In audio transmission, high capacitance can lead to the attenuation of high-frequency content; by minimizing this, Gear4Music ensures a full frequency response. The design aims to replicate the original source material with precision, capturing nuances that might be lost in lower-specification cabling. The shielding is specifically engineered to reduce the risk of noise and electromagnetic interference, which is critical in environments crowded with electronic equipment.

Studiospares Standard XLR (M) - XLR (F) Cable 60cm

Applications

This cable is primarily utilized for routing signals from mixers, synthesizers, or audio interfaces to consumer or prosumer equipment such as hi-fi amplifiers, DJ mixers, or active monitors that use RCA inputs. Because it features a TRS (Tip-Ring-Sleeve) 6.35mm connector splitting into dual RCA phono plugs, it is typically used for stereo signal distribution or connecting specific balanced outputs to unbalanced inputs where impedance and signal level allow.

Market Context

Positioned at a competitive price point of approximately £6, this cable offers a professional-grade alternative to the Gear4Music Essentials range. While the Essentials line focuses on basic connectivity, the Pro version prioritises dynamic range and noise rejection. It sits alongside other industry-standard interconnects and adaptors, such as those produced by Neutrik or Studiospares, offering a cost-effective solution for users who require reliable shielding without the higher cost of premium boutique brands.

Related gear

Frequently asked questions

What is the primary function of this cable?: The cable is designed to connect a 6.35mm (1/4 inch) TRS jack output to dual RCA phono inputs. This is commonly used to send audio from professional audio gear to consumer amplifiers or speakers.
How long is the cable?: This specific Pro model is 3 metres in length, providing sufficient reach for most home studio and stage setups.
What does 'low-capacitance' mean for audio quality?: Low capacitance prevents the loss of high-frequency detail in the audio signal. This ensures a full frequency response and maintains the dynamic range of the original source.
Is this cable suitable for live stage use?: Yes, it is precision-engineered for both stage and studio applications. Its construction is designed to resist noise and interference often found in live environments.
What is the difference between this and the 'Essentials' version?: The Pro version features higher quality engineering designed for better signal purity and lower noise. It is intended for users who require a more robust and sonically accurate connection.
Can this cable be used with a guitar?: While it has a 6.35mm jack, it is not a standard instrument cable. It is designed for line-level signals going from a TRS output to RCA inputs, rather than connecting a guitar to an amplifier.
Does this cable provide shielding against interference?: Yes, it is specifically designed to provide a pure signal without the risk of noise and interference. This is achieved through its precision-engineered internal structure.
What connectors are used on this cable?: It features a single 6.35mm (1/4") TRS Jack at one end and two RCA Phono connectors at the other end. All connectors are designed for professional reliability.
Is the TRS jack balanced?: The 6.35mm connector is a TRS (Tip-Ring-Sleeve) type. However, when split into two RCA phono connectors (which are unbalanced), the signal path becomes unbalanced stereo.
How much does this cable typically cost?: The typical price for the Gear4Music TRS 6.35mm to RCA Pro 3m cable is approximately £6.00. Prices may vary slightly depending on the retailer and current promotions.
Will this cable affect the dynamic range of my audio?: No, the cable is designed to provide a full dynamic range. Its high-quality construction is intended to replicate every nuance of the original source without compression or loss.
Can I use this to connect my audio interface to my home stereo?: Yes, this is a common use case. If your interface has a TRS output, this cable will allow you to send that signal to the RCA inputs of a hi-fi or home cinema receiver.