What is the primary purpose of the Eurolite EDX-1 Mk2?

The EDX-1 Mk2 is a single-channel dimmer designed to control the brightness or power state of one lighting fixture. It is specifically intended for use in situations where a single light is hard to reach or when an existing dimmer pack lacks sufficient channels.

Does the unit support DMX control?

Yes, it fully supports the DMX512 protocol. This allows it to be integrated into a larger lighting network and controlled via a standard DMX console alongside other fixtures.

What is included with the EDX-1 Mk2 package?

The package includes the main dimmer unit and a dedicated wired remote control. This remote allows for manual operation of the dimming channel without requiring a DMX signal.

Can the EDX-1 Mk2 be used as a simple switch?

Yes, the device features a switch pack operating mode. In this mode, the unit functions as an electronic switch, providing either full power or zero power to the connected fixture, which is essential for devices that cannot be dimmed.

How many channels does this unit control?

The EDX-1 Mk2 is a single-channel unit. It is designed to manage exactly one output source, making it a modular solution for specific lighting needs.

Is the EDX-1 Mk2 suitable for hard-to-reach locations?

Yes, its compact size is one of its primary design features. It is intended to be placed near the fixture it controls, which is particularly useful for lights mounted on high trusses or in awkward architectural spaces.

What control modes are available besides DMX?

In addition to DMX, the unit features a stand-alone mode for local operation and a wired remote mode. This variety provides flexibility for different setup environments, ranging from simple stage setups to complex DMX rigs.

Can I use this to extend my existing dimmer pack?

Absolutely. The EDX-1 Mk2 is frequently used as an extension for dimmer packs that are not large enough for a specific show. It adds one additional dimming channel to the rig without requiring a second large rack.

What is the typical price for the Eurolite EDX-1 Mk2?

The typical price range for this unit is approximately £71.00. This makes it an affordable utility tool for lighting professionals and enthusiasts.

Does the EDX-1 Mk2 have a digital display?

The unit typically uses simplified controls suitable for its compact size, focusing on functionality over complex visual interfaces. Users should refer to the manual for specific DMX addressing procedures.

Is the wired remote control optional?

No, the wired remote is included with the purchase. It serves as a standard control method for the unit when DMX infrastructure is not available.

Can this unit control a moving head light?

Generally, no. Moving heads like the Chauvet DJ Sentinel Wash or Eurolite TMH-41 have their own internal dimmers and require constant power. The EDX-1 Mk2 is designed for fixtures that require external power regulation, such as traditional halogen lamps or dimmable LEDs.

Gear article

Eurolite EDX-1 Mk2 1 Channel DMX Dimmer

The Eurolite EDX-1 Mk2 is a compact single-channel DMX dimmer designed for precise control of individual stage lighting fixtures. It serves as a versatile solution for hard-to-reach lights or as an extension for larger dimmer packs, offering both dimming and switching modes.

See live prices

Background and Design

The Eurolite EDX-1 Mk2 is a specialised piece of stage lighting equipment designed to solve specific logistical challenges in theatrical and event lighting. While many professional lighting rigs utilise large multi-channel dimmer racks, the EDX-1 Mk2 addresses the need for a singular, localised control point. Its compact form factor allows it to be positioned in locations where larger units would be impractical, such as on a high lighting bar or tucked away behind scenery.

Manufactured by Eurolite, this Mk2 version continues the brand's tradition of providing utilitarian lighting tools for both mobile DJs and permanent installations. The chassis is built to be rugged yet small, ensuring it can withstand the rigours of touring while maintaining a minimal footprint.

Functional Operation

The EDX-1 Mk2 provides three distinct control modes to cater to different operational requirements:

DMX Mode: Integrates seamlessly into a standard DMX512 lighting chain, allowing the channel to be controlled via a professional lighting console.
Stand-alone Mode: Enables local control of the connected fixture without the need for an external controller.
Wired Remote: Includes a dedicated wired remote control, which is particularly useful for manual operation from a distance when DMX infrastructure is not present.

Users can toggle the unit between two fundamental operating modes: a 'Dimmer' mode for gradual intensity control and a 'Switch Pack' mode, which acts as a binary on/off relay for effects or fixtures that should not be dimmed.

Use Cases

This unit is primarily employed in scenarios where a lighting rig needs a slight expansion beyond its current capacity. If a technician has a six-channel dimmer pack but requires a seventh light, the EDX-1 Mk2 provides a cost-effective alternative to purchasing an entirely new multi-channel rack. Additionally, it is an ideal solution for 'rogue' fixtures—lights that are physically distant from the main dimming hub, such as single spotlights in hard-to-reach architectural features or high-altitude trusses.

Comparative Context

Within the wider lighting market, the EDX-1 Mk2 sits alongside various other control solutions. While moving heads like the Eurolite LED TMH-41 or the Stagg Headbanger XT contain their own internal dimming electronics, traditional incandescent or static LED fixtures often require external dimming. Compared to wireless controllers like the Chauvet DJ FlareCON Air 2, the EDX-1 Mk2 offers a more traditional wired approach focused on power delivery rather than just signal distribution. It is often used in systems that include PAR cans, such as the Cameo ROOT PAR 4, though its primary role remains the regulation of power to non-intelligent fixtures.

Related gear

Frequently asked questions

What is the primary purpose of the Eurolite EDX-1 Mk2?: The EDX-1 Mk2 is a single-channel dimmer designed to control the brightness or power state of one lighting fixture. It is specifically intended for use in situations where a single light is hard to reach or when an existing dimmer pack lacks sufficient channels.
Does the unit support DMX control?: Yes, it fully supports the DMX512 protocol. This allows it to be integrated into a larger lighting network and controlled via a standard DMX console alongside other fixtures.
What is included with the EDX-1 Mk2 package?: The package includes the main dimmer unit and a dedicated wired remote control. This remote allows for manual operation of the dimming channel without requiring a DMX signal.
Can the EDX-1 Mk2 be used as a simple switch?: Yes, the device features a switch pack operating mode. In this mode, the unit functions as an electronic switch, providing either full power or zero power to the connected fixture, which is essential for devices that cannot be dimmed.
How many channels does this unit control?: The EDX-1 Mk2 is a single-channel unit. It is designed to manage exactly one output source, making it a modular solution for specific lighting needs.
Is the EDX-1 Mk2 suitable for hard-to-reach locations?: Yes, its compact size is one of its primary design features. It is intended to be placed near the fixture it controls, which is particularly useful for lights mounted on high trusses or in awkward architectural spaces.
What control modes are available besides DMX?: In addition to DMX, the unit features a stand-alone mode for local operation and a wired remote mode. This variety provides flexibility for different setup environments, ranging from simple stage setups to complex DMX rigs.
Can I use this to extend my existing dimmer pack?: Absolutely. The EDX-1 Mk2 is frequently used as an extension for dimmer packs that are not large enough for a specific show. It adds one additional dimming channel to the rig without requiring a second large rack.
What is the typical price for the Eurolite EDX-1 Mk2?: The typical price range for this unit is approximately £71.00. This makes it an affordable utility tool for lighting professionals and enthusiasts.
Does the EDX-1 Mk2 have a digital display?: The unit typically uses simplified controls suitable for its compact size, focusing on functionality over complex visual interfaces. Users should refer to the manual for specific DMX addressing procedures.
Is the wired remote control optional?: No, the wired remote is included with the purchase. It serves as a standard control method for the unit when DMX infrastructure is not available.
Can this unit control a moving head light?: Generally, no. Moving heads like the Chauvet DJ Sentinel Wash or Eurolite TMH-41 have their own internal dimmers and require constant power. The EDX-1 Mk2 is designed for fixtures that require external power regulation, such as traditional halogen lamps or dimmable LEDs.